plustek: Tip to installation of USB Scanner Plustex driver.
Subject:
Re: Tip to installation of USB Scanner Plustex driver.
From:
"Jaeger, Gerhard" ####@####.####
Date:
21 Jun 2002 08:54:37 -0000
Message-Id: <200206210855.KAA10489@kah.ulm.sysgo.de>
Thank you for the information,
but it is not necessary to load the pt_drv module while
using the USB device. pt_drv is only necessary for parallel
port scanners. You also need only the [usb] section in
the conf file, delete the parport secrtion...
Seems I have to clarify this in the doc...
Gerhard
On Freitag, 21. Juni 2002 08:46, Thianchai \(TTCL\) wrote:
> Dear sir,
>
>
>
> I would like to make a tip to install USB scanner from Plustex. I use
> RedHat7.3 and KYE-Genius scanner HR6E, USB connection. When follow
> INSTALL of driver Plustex either version 41 or 42 to modified file
> "modules.conf" by adding 3 lines, I cannot success "make load" since
> "insmode" will report fail. The fail is due to "port address" or "IRQ"
> error by "insmode" checking.
>
> Tip of solution
>
> 1. modify plustex.conf as "man sane-plustex" instructed by
>
> 1.1 adding [USB] vendor model ID (checking by command "lsusb" to see
> what USB scanner's vender / model name that scanner connecting to USB
> port).
>
> 1.2 adding device=/dev/usb/scanner0 (checking by command "lsusb" to
> see which USB port or device name that scanner connecting to; my case is
> scanner0).
>
> 2. modify modules.conf as INSTALL instructed by
>
> 2.1 add first line per INSTALL instruction.
>
> 2.2 Neglect second line of INSTALL instruction.
>
> 2.3 Add third line per INSTALL instruction except to port address use
> "port=0x000", then OK.
>
>
>
> By method above, I can finish make load and insmode pass, please check
> Plustex driver install by use command "modprobe pt_drv".
>
>
>
> Thank you.
>
>
>
> Mail from Thianchai Suksuwan.
>
> Toyo-Thai Corporation Limited.
>
> 159 Sermit Tower 22nd fl,
>
> Sukumvit21 (Asoke),
>
> Ket Watana, Bangkok 10110
>
> Thailand.
>
> Tel 66+0-2260-8505.
>
> Fax 66+-0-2260-8526
>
> Fax 1(US)-413-677-2298
--
-------------------------
|gerhard AT gjaeger DOT de|
-------------------------
