plustek: OP9636T memory failure?
Subject:
Re: OP9636T memory failure?
From:
"Jaeger, Gerhard" ####@####.####
Date:
31 Oct 2001 08:14:51 -0000
Message-Id: <200110310818.JAA24277@kah.ulm.sysgo.de>
Hi Alex,
you might play around with the module settings like: forceMode=1
You can alos enable EPP again, but make sure, that no ECP is selected.
I'm sorry, that there is no easier way to solve this problem than
experimenting...
I will also check the "sound" problem....
Gerhard
On Sonntag, 28. Oktober 2001 18:59, Alexander Runge wrote:
> > You might play around with BIOS settings (set it to plain SPP) or
> > remove the IEEE1284 stuff form your parport configuration.
>
> I recompiled the parport modules and it works now!!!
> In the messages it says that SPP mode is selected and thus
> of course it's unbelievably slow :( Is there any workaround?
>
> The image qualtiy is OK for me.
>
> And another thing: after scanning it makes a rather
> unsettling noise when the CCD carriers moves backwards, geeeeee
> sounds as if the wohl thing wants to implode ;)
>
>
> Regards, Alex!!!
>
