plustek: issues with opticpro 9630p/fbiv
Subject:
issues with opticpro 9630p/fbiv
From:
niraj gupta ####@####.####
Date:
7 Nov 2001 05:54:07 -0000
Message-Id: <0GMF00CEG1Q30W@mta5.snfc21.pbi.net>
hi
thx all the great work you guys have done,
i was trying to make my 9630 scanner work on my system,
the driver seems to install ok and recognize the scanner but when i use
scanimage i was getiing i/o error in device about 99% of the time
using strace i found that the error was 9009 which _E_ABORT
info about my system 600EB P3 with 896 MB running 2.4.13-686 version
from debian distribution. the modules was loaded using, i did try slowio=0
with the same results.
the scanner seems to be doing the right thing, ie no strange noises etc
insmod pt_drv.o lampoff=60 warmup=0 port=0x378 lOffonEnd=1 mov=0 slowIO=1
forceMode=0
so reloaded the driver in debug mode an i collected these driver messages
Nov 6 21:28:23 rakh kernel: pt_drv_open()
Nov 6 21:28:25 rakh kernel: ioctl(_PTDRV_OPEN_DEVICE)
Nov 6 21:28:25 rakh kernel: Lamp-Timer stopped!
Nov 6 21:28:25 rakh kernel: Init settings done
Nov 6 21:28:25 rakh kernel: Using slow I/O
Nov 6 21:28:25 rakh kernel: ptdrvOpen(port=0x378)
Nov 6 21:28:25 rakh kernel: Try to claim the parport
Nov 6 21:28:25 rakh kernel: parport-modi: SPP PS/2 EPP EPP(ECP) PS/2(ECP)
Nov 6 21:28:25 rakh kernel: Using EPP-mode
Nov 6 21:28:25 rakh kernel: Starting Scanner-detection (ASIC 96001/3)
Nov 6 21:28:25 rakh kernel: ************ DETECTP48xx ************
Nov 6 21:28:25 rakh kernel: ModelSet4800()
Nov 6 21:28:25 rakh kernel: modelInitPageSettings()
Nov 6 21:28:25 rakh kernel: A4 set
Nov 6 21:28:25 rakh kernel: ModelSet4800() done.
Nov 6 21:28:25 rakh kernel: P48xxInitAsic()
Nov 6 21:28:25 rakh kernel: DacInitialize()
Nov 6 21:28:25 rakh kernel: ImageInitialize()
Nov 6 21:28:25 rakh kernel: IOFuncInitialize()
Nov 6 21:28:25 rakh kernel: IOInitialize()
Nov 6 21:28:25 rakh kernel: MotorInitialize()
Nov 6 21:28:25 rakh kernel: Dataport = 0x0378
Nov 6 21:28:25 rakh kernel: Ctrlport = 0x037a
Nov 6 21:28:25 rakh kernel: Test 0x55
Nov 6 21:28:25 rakh kernel: Test 0xAA
Nov 6 21:28:25 rakh kernel: Compare data=0x7f and status=0xf, port=0x378
Nov 6 21:28:25 rakh kernel: p48xxReadWriteTest()
Nov 6 21:28:25 rakh kernel: Found a 96003 ASIC at Reg 0x13
Nov 6 21:28:25 rakh kernel: ModelSet4830()
Nov 6 21:28:25 rakh kernel: modelInitPageSettings()
Nov 6 21:28:25 rakh kernel: A4 set
Nov 6 21:28:25 rakh kernel: ModelSet4830() done.
Nov 6 21:28:25 rakh kernel: p48xxDoTest()
Nov 6 21:28:25 rakh kernel: found 131072 bytes of memory
Nov 6 21:28:25 rakh kernel: tmpByte[0x18] = 0x08
Nov 6 21:28:25 rakh kernel: tmpByte = 0x08, cntr = 128, AsicId = 0x10
Nov 6 21:28:25 rakh kernel: ModelSet9360()
Nov 6 21:28:25 rakh kernel: modelInitPageSettings()
Nov 6 21:28:25 rakh kernel: A4 set
Nov 6 21:28:25 rakh kernel: modelInitPageSettings()
Nov 6 21:28:25 rakh kernel: A4 set
Nov 6 21:28:25 rakh kernel: ModelSet9630() done.
Nov 6 21:28:25 rakh kernel: It seems we have a 9630
Nov 6 21:28:25 rakh kernel: DacInitialize()
Nov 6 21:28:25 rakh kernel: ImageInitialize()
Nov 6 21:28:25 rakh kernel: IOFuncInitialize()
Nov 6 21:28:25 rakh kernel: IOInitialize()
Nov 6 21:28:25 rakh kernel: MotorInitialize()
Nov 6 21:28:25 rakh kernel: Putting Scanner (ASIC 96001/3) into Idle-Mode
Nov 6 21:28:25 rakh kernel: detectScannerConnection() returns 0.
Nov 6 21:28:25 rakh kernel: p48xxSetupScannerVariables()
Nov 6 21:28:25 rakh kernel: No ASIC 97003 found.
Nov 6 21:28:25 rakh kernel: Status-Register = 0xA7
Nov 6 21:28:25 rakh kernel: Scanner has Full/Half Stepping drive
Nov 6 21:28:25 rakh kernel: CCD is SONY Type
Nov 6 21:28:26 rakh kernel: *** setupBuffers ***
Nov 6 21:28:26 rakh kernel: Driverbuf(170780 bytes) needed !
Nov 6 21:28:26 rakh kernel: pColorRunTab = 0xfb22f52c - 0xfb234b1c
Nov 6 21:28:26 rakh kernel: *** DETECTION DONE, result: 0 ***
Nov 6 21:28:26 rakh kernel: ioctl(_PTDRV_GET_CAPABILITES)
Nov 6 21:28:26 rakh kernel: ioctl(_PTDRV_GET_LENSINFO)
Nov 6 21:28:26 rakh kernel: ioctl(_PTDRV_STOP_SCAN)
Nov 6 21:28:26 rakh kernel: Waiting for Sensor to be back in position
Nov 6 21:28:26 rakh kernel: - done !
Nov 6 21:28:26 rakh kernel: ioctl(_PTDRV_CLOSE_DEVICE)
Nov 6 21:28:26 rakh kernel: *** cleanup buffers ***
Nov 6 21:28:26 rakh kernel: Putting Scanner (ASIC 96001/3) into Idle-Mode
Nov 6 21:28:26 rakh kernel: Lamp-Timer started!
Nov 6 21:28:26 rakh kernel: pt_drv_close()
Nov 6 21:28:26 rakh kernel: ptdrvClose()
Nov 6 21:28:26 rakh kernel: MiscRestorePort()
Nov 6 21:28:26 rakh kernel: - no need to restore portmode !
Nov 6 21:28:26 rakh kernel: Releasing parport
Nov 6 21:28:26 rakh kernel: pt_drv_open()
Nov 6 21:28:28 rakh kernel: ioctl(_PTDRV_OPEN_DEVICE)
Nov 6 21:28:28 rakh kernel: Lamp-Timer stopped!
Nov 6 21:28:28 rakh kernel: Init settings done
Nov 6 21:28:28 rakh kernel: Using slow I/O
Nov 6 21:28:28 rakh kernel: ptdrvOpen(port=0x378)
Nov 6 21:28:28 rakh kernel: Try to claim the parport
Nov 6 21:28:28 rakh kernel: parport-modi: SPP PS/2 EPP EPP(ECP) PS/2(ECP)
Nov 6 21:28:28 rakh kernel: Using EPP-mode
Nov 6 21:28:28 rakh kernel: Starting Scanner-detection (ASIC 96001/3)
Nov 6 21:28:28 rakh kernel: ************ DETECTP48xx ************
Nov 6 21:28:28 rakh kernel: ModelSet4800()
Nov 6 21:28:28 rakh kernel: modelInitPageSettings()
Nov 6 21:28:28 rakh kernel: A4 set
Nov 6 21:28:28 rakh kernel: ModelSet4800() done.
Nov 6 21:28:28 rakh kernel: P48xxInitAsic()
Nov 6 21:28:28 rakh kernel: DacInitialize()
Nov 6 21:28:28 rakh kernel: ImageInitialize()
Nov 6 21:28:28 rakh kernel: IOFuncInitialize()
Nov 6 21:28:28 rakh kernel: IOInitialize()
Nov 6 21:28:28 rakh kernel: MotorInitialize()
Nov 6 21:28:28 rakh kernel: Dataport = 0x0378
Nov 6 21:28:28 rakh kernel: Ctrlport = 0x037a
Nov 6 21:28:28 rakh kernel: Test 0x55
Nov 6 21:28:28 rakh kernel: Test 0xAA
Nov 6 21:28:28 rakh kernel: Compare data=0x7f and status=0xf, port=0x378
Nov 6 21:28:28 rakh kernel: p48xxReadWriteTest()
Nov 6 21:28:28 rakh kernel: Found a 96003 ASIC at Reg 0x13
Nov 6 21:28:28 rakh kernel: ModelSet4830()
Nov 6 21:28:28 rakh kernel: modelInitPageSettings()
Nov 6 21:28:28 rakh kernel: A4 set
Nov 6 21:28:28 rakh kernel: ModelSet4830() done.
Nov 6 21:28:28 rakh kernel: p48xxDoTest()
Nov 6 21:28:28 rakh kernel: found 131072 bytes of memory
Nov 6 21:28:28 rakh kernel: tmpByte[0x18] = 0x08
Nov 6 21:28:28 rakh kernel: tmpByte = 0x08, cntr = 128, AsicId = 0x10
Nov 6 21:28:28 rakh kernel: ModelSet9360()
Nov 6 21:28:28 rakh kernel: modelInitPageSettings()
Nov 6 21:28:28 rakh kernel: A4 set
Nov 6 21:28:28 rakh kernel: modelInitPageSettings()
Nov 6 21:28:28 rakh kernel: A4 set
Nov 6 21:28:28 rakh kernel: ModelSet9630() done.
Nov 6 21:28:28 rakh kernel: It seems we have a 9630
Nov 6 21:28:28 rakh kernel: DacInitialize()
Nov 6 21:28:28 rakh kernel: ImageInitialize()
Nov 6 21:28:28 rakh kernel: IOFuncInitialize()
Nov 6 21:28:28 rakh kernel: IOInitialize()
Nov 6 21:28:28 rakh kernel: MotorInitialize()
Nov 6 21:28:28 rakh kernel: Putting Scanner (ASIC 96001/3) into Idle-Mode
Nov 6 21:28:28 rakh kernel: detectScannerConnection() returns 0.
Nov 6 21:28:28 rakh kernel: p48xxSetupScannerVariables()
Nov 6 21:28:28 rakh kernel: No ASIC 97003 found.
Nov 6 21:28:28 rakh kernel: Status-Register = 0xA7
Nov 6 21:28:28 rakh kernel: Scanner has Full/Half Stepping drive
Nov 6 21:28:28 rakh kernel: CCD is SONY Type
Nov 6 21:28:29 rakh kernel: *** setupBuffers ***
Nov 6 21:28:29 rakh kernel: Driverbuf(170780 bytes) needed !
Nov 6 21:28:29 rakh kernel: pColorRunTab = 0xfb22f52c - 0xfb234b1c
Nov 6 21:28:29 rakh kernel: *** DETECTION DONE, result: 0 ***
Nov 6 21:28:29 rakh kernel: ioctl(_PTDRV_GET_CAPABILITES)
Nov 6 21:28:29 rakh kernel: ioctl(_PTDRV_GET_LENSINFO)
Nov 6 21:28:29 rakh kernel: ioctl(_PTDRV_PUT_IMAGEINFO)
Nov 6 21:28:29 rakh kernel: imageP96GetInfo()
Nov 6 21:28:29 rakh kernel: xyPhyDpi.x = 50, xyPhyDpi.y = 50
Nov 6 21:28:29 rakh kernel: crArea.x = 0, crArea.y = 0
Nov 6 21:28:29 rakh kernel: crArea.cx = 2539, crArea.cy = 2952
Nov 6 21:28:29 rakh kernel: xyDpi.x = 50, xyDpi.y = 50
Nov 6 21:28:29 rakh kernel: AppLinesPerArea = 492
Nov 6 21:28:29 rakh kernel: AppPixelsPerLine = 423
Nov 6 21:28:29 rakh kernel: AppPhyBytesPerLine = 1269
Nov 6 21:28:29 rakh kernel: AppBytesPerLine = 1269
Nov 6 21:28:29 rakh kernel: AsicPixelsPerPlane = 423
Nov 6 21:28:29 rakh kernel: AsicBytesPerPlane = 423
Nov 6 21:28:29 rakh kernel: AsicBytesPerLine = 423
Nov 6 21:28:29 rakh kernel: Physical Bytes = 423
Nov 6 21:28:29 rakh kernel: ioctl(_PTDRV_GET_CROPINFO)
Nov 6 21:28:29 rakh kernel: ioctl(_PTDRV_SET_ENV)
Nov 6 21:28:29 rakh kernel: imageSetupP96ScanSettings()
Nov 6 21:28:29 rakh kernel: imageP96GetInfo()
Nov 6 21:28:29 rakh kernel: xyPhyDpi.x = 50, xyPhyDpi.y = 50
Nov 6 21:28:29 rakh kernel: crArea.x = 0, crArea.y = 0
Nov 6 21:28:29 rakh kernel: crArea.cx = 2539, crArea.cy = 2952
Nov 6 21:28:29 rakh kernel: xyDpi.x = 50, xyDpi.y = 50
Nov 6 21:28:29 rakh kernel: AppLinesPerArea = 492
Nov 6 21:28:29 rakh kernel: AppPixelsPerLine = 423
Nov 6 21:28:29 rakh kernel: AppPhyBytesPerLine = 1269
Nov 6 21:28:29 rakh kernel: AppBytesPerLine = 1269
Nov 6 21:28:29 rakh kernel: AsicPixelsPerPlane = 423
Nov 6 21:28:29 rakh kernel: AsicBytesPerPlane = 423
Nov 6 21:28:29 rakh kernel: AsicBytesPerLine = 1269
Nov 6 21:28:29 rakh kernel: Physical Bytes = 423
Nov 6 21:28:29 rakh kernel: brightness = 0 -> 0
Nov 6 21:28:29 rakh kernel: contrast*100 = 0 -> 100
Nov 6 21:28:29 rakh kernel: MapSetupDither() - 3
Nov 6 21:28:29 rakh kernel: ioctl(_PTDRV_START_SCAN)
Nov 6 21:28:29 rakh kernel: Using SAME Lamp !
Nov 6 21:28:30 rakh kernel: PtDrvRead(624348 bytes)*****************
Nov 6 21:28:30 rakh kernel: MonoBuf = 0xe3e8b800[1269], scaleBuf = 0x0
Nov 6 21:28:30 rakh kernel: Waiting for Sensor to be back in position
Nov 6 21:28:30 rakh kernel: - done !
Nov 6 21:28:30 rakh kernel: p48xxCalibration()
Nov 6 21:28:30 rakh kernel: dacP96003WaitForShading()
Nov 6 21:28:30 rakh kernel: motorP96GotoShadingPosition()
Nov 6 21:28:33 rakh kernel: dacA3IAdjust10BitShading()
Nov 6 21:28:35 rakh kernel: p48xxSetupScanningCondition()
Nov 6 21:28:35 rakh kernel: wLinesPer64kTime = 513
Nov 6 21:28:35 rakh kernel: ioP96InitialSetCurrentSpeed()
Nov 6 21:28:35 rakh kernel: Initially set to 1
Nov 6 21:28:35 rakh kernel: Current Speed = 1
Nov 6 21:28:35 rakh kernel: Current Speed = 1
Nov 6 21:28:35 rakh kernel: MinReadFifo = 1
Nov 6 21:28:35 rakh kernel: RD_ModeControl = 0x00
Nov 6 21:28:35 rakh kernel: RD_MotorControl = 0x0f
Nov 6 21:28:35 rakh kernel: RD_ScanControl = 0x15
Nov 6 21:28:35 rakh kernel: RD_Dpi = 50
Nov 6 21:28:35 rakh kernel: RD_Pixels = 423
Nov 6 21:28:35 rakh kernel: motorP96SetupRunTable()
Nov 6 21:28:35 rakh kernel: wLengthY = 3572, wP96BaseDpi = 600
Nov 6 21:28:35 rakh kernel: dwAppLinesPerArea = 492
Nov 6 21:28:35 rakh kernel: dwAppBytesPerLine = 1269
Nov 6 21:28:35 rakh kernel: dwLinesToRead = 492
Nov 6 21:29:03 rakh kernel: Timeout - Scanner malfunction !!
Nov 6 21:29:03 rakh kernel: Waiting for Sensor to be back in position
Nov 6 21:29:11 rakh kernel: - done !
Nov 6 21:29:11 rakh kernel: ReadOneImageLine() failed at line 299!
Nov 6 21:29:11 rakh kernel: read aborted!
Nov 6 21:29:11 rakh kernel: ioctl(_PTDRV_STOP_SCAN)
Nov 6 21:29:11 rakh kernel: Waiting for Sensor to be back in position
Nov 6 21:29:11 rakh kernel: - done !
Nov 6 21:29:11 rakh kernel: ioctl(_PTDRV_CLOSE_DEVICE)
Nov 6 21:29:11 rakh kernel: *** cleanup buffers ***
Nov 6 21:29:11 rakh kernel: Putting Scanner (ASIC 96001/3) into Idle-Mode
Nov 6 21:29:11 rakh kernel: Lamp-Timer started!
Nov 6 21:29:11 rakh kernel: pt_drv_close()
Nov 6 21:29:11 rakh kernel: ptdrvClose()
Nov 6 21:29:11 rakh kernel: MiscRestorePort()
Nov 6 21:29:11 rakh kernel: - no need to restore portmode !
Nov 6 21:29:11 rakh kernel: Releasing parport
Nov 6 21:30:11 rakh kernel: !! IRQ !! Lamp-Timer stopped.
Nov 6 21:30:11 rakh kernel: Try to claim the parport
Nov 6 21:30:11 rakh kernel: Releasing parport
