plustek: 9646T - probs to load module
Subject:
Re: 9646T - probs to load module
From:
mnk ####@####.####
Date:
23 Jul 2000 14:57:36 -0000
Message-Id: <397B0885.D149E54E@innocent.com>
Stefan Eckert wrote:
>
> Hello,
>
> I've had some problems installing the driver for my Plustek Optic-Pro 9636T on
> my SuSE 6.4 system.
> Though I followed strictly the HOWTO by Alejandro Imass, I'm not able to load
> the pt_drv - module.
> I tried to do this with the plustek-sane-0_35 - and with the
> plustek-sane-0_36_16 - version of the driver.
>
> ..................
> Here is the output of lsmod - before trying to load the module:
>
> Module Size Used by
> nfsd 146188 4 (autoclean)
> ne2k-pci 4232 1 (autoclean)
> 8390 6228 0 (autoclean) [ne2k-pci]
> serial 42612 0 (autoclean)
> memstat 1476 0 (unused)
> ide-scsi 7432 0
> nls_iso8859-1 2268 2 (autoclean)
>
> .....................
>
> Here is the output when I try to load the module with "make -f Makefile load":
>
> /sbin/modprobe pt_drv || exit 1
> /lib/modules/2.2.14/misc/pt_drv.o: init_module: Das Gerät oder die Ressource ist belegt
> /lib/modules/2.2.14/misc/pt_drv.o: insmod /lib/modules/2.2.14/misc/pt_drv.o failed
> /lib/modules/misc/pt_drv.o: init_module: Das Gerät oder die Ressource ist belegt
> /lib/modules/misc/pt_drv.o: insmod /lib/modules/misc/pt_drv.o failed
> /lib/modules/misc/pt_drv.o: insmod pt_drv failed
> make: *** [load] Error 1
>
> .........................
>
Stefan,
Try this to get it to load:
modprobe parport_pc
insmod -f pt_drv
Mark
>Hello,
>I've had some problems installing the driver for my Plustek Optic-Pro 9636T on
>my SuSE 6.4 system.
>Though I followed strictly the HOWTO by Alejandro Imass, I'm not able to load
>the pt_drv - module.
>I tried to do this with the plustek-sane-0_35 - and with the
>plustek-sane-0_36_16 - version of the driver.
>
>..................
>
>
> Here the output of lsmod after trying to load the module:
>
> Module Size Used by
> parport_probe 3492 0 (autoclean)
> parport_pc 7472 2 (autoclean)
> parport 7464 2 [parport_probe parport_pc]
> ppp_deflate 40300 0 (autoclean)
> bsd_comp 4020 0 (autoclean)
> ppp 20908 2 (autoclean) [ppp_deflate bsd_comp]
> slhc 4440 0 (autoclean) [ppp]
> nfsd 146188 4 (autoclean)
> ne2k-pci 4232 1 (autoclean)
> 8390 6228 0 (autoclean) [ne2k-pci]
> serial 42612 2 (autoclean)
> memstat 1476 0 (unused)
> ide-scsi 7432 0
> nls_iso8859-1 2268 2 (autoclean)
>
> .......................
>
> And finally the output of dmesg while trying to load the module:
>
> parport0: PC-style at 0x378 [SPP,PS2,EPP]
> parport_probe: failed
> parport0: no IEEE-1284 device present
>
> I would be very happy if you could help me.
>
> Thank you,
> Stefan
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: ####@####.####
> For additional commands, e-mail: ####@####.####
