plustek: Canon Lide 20 not detected by scanimage
Subject:
Re: Canon Lide 20 not detected by scanimage
From:
Felix Holzke ####@####.####
Date:
8 Sep 2004 09:14:31 +0100
Message-Id: <1094631163.3223.22.camel@debugger>
Am Mi, den 08.09.2004 schrieb Gerhard Jaeger um 8:49:
> > It is detected by sane-find-scanner but not by scanimage -L. Below there
> > is my configuration and debug output.
>
> I guess the configuration is wrong, try the following:
>
> [usb]
> device auto
>
> remove all the other stuff...
I did that before but now again with all other stuff removed (see
below). No success. I noticed that with the lide 20 canon removed the
usb 2.0 capability from the lide 20 after some time, at least they
removed that description from packing (I use one of the early usb2
capable ones). Since you write something about chipset changes in other
plustek models within the same product series, can I somehow check the
chipset etc. to recognize if my scanner is the model your driver expects
it to be?
sane-find-scanner offers:
vendor=0x04a9 [Canon], product=0x220d [CanoScan], chip=LM9832/3
and your man page says:
CanoScan LIDE20 LM9833 600x1200dpi 48bit 512Kb 0x220D
Can I provide some additional information which could help you solve the
problem?
regards,
Felix
[sanei_debug] Setting debug level of plustek to 20.
[plustek] Plustek backend V0.47-11, part of sane-backends 1.0.14
[plustek] >[usb]<
[plustek] next device uses autodetection
[plustek] ... next device
[plustek] >device auto<
[plustek] Decoding device name >auto<
[plustek] attach (auto, 0xbfffc740, (nil))
[plustek] Device configuration:
[plustek] device name : >auto<
[plustek] USB-ID : ><
[plustek] model ovr. : 0
[plustek] warmup : -1s
[plustek] lampOff : -1
[plustek] lampOffOnEnd : yes
[plustek] cacheCalData : no
[plustek] altCalibrate : no
[plustek] skipCalibr. : no
[plustek] skipFine : no
[plustek] skipFineWhite: no
[plustek] invertNegs. : no
[plustek] pos_x : 0
[plustek] pos_y : 0
[plustek] pos_shading_y: -1
[plustek] neg_x : 0
[plustek] neg_y : 0
[plustek] neg_shading_y: -1
[plustek] tpa_x : 0
[plustek] tpa_y : 0
[plustek] tpa_shading_y: -1
[plustek] red gain : -1
[plustek] green gain : -1
[plustek] blue gain : -1
[plustek] red lampoff : -1
[plustek] green lampoff: -1
[plustek] blue lampoff : -1
[plustek] red Gamma : 1.00
[plustek] green Gamma : 1.00
[plustek] blue Gamma : 1.00
[plustek] gray Gamma : 1.00
[plustek] ---------------------
[plustek] usbDev_open(auto,)
[plustek] Autodetection...
[plustek] Checking for 0x07b3-0x0010
[plustek] Checking for 0x07b3-0x0011
[plustek] Checking for 0x07b3-0x0017
[plustek] Checking for 0x07b3-0x0015
[plustek] Checking for 0x07b3-0x0017
[plustek] Checking for 0x07b3-0x0013
[plustek] Checking for 0x07b3-0x0013
[plustek] Checking for 0x07b3-0x0011
[plustek] Checking for 0x07b3-0x0010
[plustek] Checking for 0x07b3-0x0014
[plustek] Checking for 0x07b3-0x0015
[plustek] Checking for 0x07b3-0x0014
[plustek] Checking for 0x07b3-0x0016
[plustek] Checking for 0x07b3-0x0017
[plustek] Checking for 0x07b3-0x0017
[plustek] Checking for 0x07b3-0x0007
[plustek] Checking for 0x07b3-0x000f
[plustek] Checking for 0x07b3-0x000f
[plustek] Checking for 0x07b3-0x0005
[plustek] Checking for 0x07b3-0x0014
[plustek] Checking for 0x07b3-0x0012
[plustek] Checking for 0x0400-0x1000
[plustek] Checking for 0x0400-0x1001
[plustek] Checking for 0x0400-0x1001
[plustek] Checking for 0x0458-0x2007
[plustek] Checking for 0x0458-0x2008
[plustek] Checking for 0x0458-0x2009
[plustek] Checking for 0x0458-0x2013
[plustek] Checking for 0x0458-0x2015
[plustek] Checking for 0x0458-0x2016
[plustek] Checking for 0x03f0-0x0505
[plustek] Checking for 0x03f0-0x0605
[plustek] Checking for 0x04b8-0x010f
[plustek] Checking for 0x04b8-0x011d
[plustek] Checking for 0x1606-0x0060
[plustek] Checking for 0x1606-0x0160
[plustek] Checking for 0x049f-0x001a
[plustek] Checking for 0x04a9-0x2206
[plustek] Checking for 0x04a9-0x2207
[plustek] Checking for 0x04a9-0x2208
[plustek] Checking for 0x04a9-0x220d
[plustek] Checking for 0x04a9-0x220e
[plustek] No supported device found!
[plustek] open failed: -1
[plustek] sane_get_devices (0xbfffe858, 0)
device `v4l:/dev/video0' is a Noname BT878 video (Hauppauge (bt878))
virtual device
[plustek] sane_exit