plustek: plustek 9636T
Subject:
plustek 9636T
From:
Nicolas DELY ####@####.####
Date:
16 Nov 2005 19:32:40 +0000
Message-Id: <437B8947.20206@gmail.com>
Hi all,
my configuration:
* asus A8V Deluxe Edition K8T800Pro
* AMD athlon 64 3000+
* gentoo 2005.1 in x86_64 native mode
* linux 2.6.13-gentoo-r3
* sane-backends-1.0.15
root@gohan:/usr/local/src # dmesg |grep parport
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
root@gohan:/usr/local/src # dmesg |grep ppdev
ppdev: user-space parallel port driver
root@gohan:/usr/local/src # ll /dev/parport0
crw-rw-rw- 1 root root 99, 0 oct 31 23:13 /dev/parport0
root@gohan:/usr/local/src # export SANE_DEBUG_PLUSTEK_PP=20 ;
root@gohan:/usr/local/src # scanimage -L
[sanei_debug] Setting debug level of plustek_pp to 20.
[plustek_pp] PlustekPP backend V0.43-5, part of sane-backends 1.0.15
[plustek_pp] ># Plustek-PP SANE Backend configuration file<
[plustek_pp] ># For use with Plustek parallel-port scanners<
[plustek_pp] >#<
[plustek_pp] ><
[plustek_pp] >#<
[plustek_pp] ># user either [direct] or [kernel] to access the scanner<
[plustek_pp] ># when using [kernel], device specifies the device-node,
which is created<
[plustek_pp] ># by the kernel-module loader (applies only to Linux)<
[plustek_pp] ># when using [direct], device is used to set the
parallel-port base address<
[plustek_pp] ># or a device-name suitable for libieee1284, i.e. parport0<
[plustek_pp] >#<
[plustek_pp] >[direct]<
[plustek_pp] >device 0x378<
[plustek_pp] Decoding device name >0x378<
[plustek_pp] ><
[plustek_pp] >#<
[plustek_pp] ># leave the default values as specified in /etc/modules.conf<
[plustek_pp] >#<
[plustek_pp] >option warmup -1<
[plustek_pp] Decoding option >warmup<
[plustek_pp] >option lOffOnEnd -1<
[plustek_pp] Decoding option >lOffOnEnd<
[plustek_pp] >option lampOff -1<
[plustek_pp] Decoding option >lampOff<
[plustek_pp] ><
[plustek_pp] ># model override switch, mostly for cosmetic changes, if
the autodetection<
[plustek_pp] ># does not work or could not work correctly<
[plustek_pp] >#option mov 7<
[plustek_pp] ><
[plustek_pp] >#<
[plustek_pp] ># example for accessing the scanner via libieee1284<
[plustek_pp] >#<
[plustek_pp] >[direct]<
[plustek_pp] attach (0x378, 0x7fffffe3d710, (nil))
[plustek_pp] Device configuration:
[plustek_pp] device name : >0x378<
[plustek_pp] direct I/O : yes
[plustek_pp] warmup : -1s
[plustek_pp] lampOff : -1
[plustek_pp] lampOffOnEnd : yes
[plustek_pp] model override: 0
[plustek_pp] ---------------------
[plustek_pp] drvopen()
[plustek_pp] open: PtDrvInit failed: 4
[plustek_pp] open failed: -1
[plustek_pp] >device parport0<
[plustek_pp] Decoding device name >parport0<
[plustek_pp] ><
[plustek_pp] >#<
[plustek_pp] ># example for accessing the scanner via the kernel module<
[plustek_pp] >#<
[plustek_pp] >#[kernel]<
[plustek_pp] >#device /dev/pt_drv<
[plustek_pp] >#<
[plustek_pp] >#option warmup -1<
[plustek_pp] >#option lOffOnEnd -1<
[plustek_pp] >#option lampOff -1<
[plustek_pp] attach (parport0, 0x7fffffe3d710, (nil))
[plustek_pp] Device configuration:
[plustek_pp] device name : >parport0<
[plustek_pp] direct I/O : yes
[plustek_pp] warmup : -1s
[plustek_pp] lampOff : -1
[plustek_pp] lampOffOnEnd : yes
[plustek_pp] model override: 0
[plustek_pp] ---------------------
[plustek_pp] drvopen()
[plustek_pp] open: PtDrvInit failed: 4
[plustek_pp] open failed: -1
[plustek_pp] sane_get_devices (0x7fffffe3f7d0, 0)
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
[plustek_pp] sane_exit
Optipro 9636T scanner is plugged on parallel port and is switch on power on.
Can someone explain me where is the problem ?
Regards,
Nicolas DÉLY
