Subject:
Re: Plustek OpticPro 12000T
From:
Jastra ####@####.####
Date:
21 Jan 2008 09:01:15 -0000
Message-Id: <Pine.LNX.4.64.0801210953390.23844@infoserve.pl>
> Make sure parport drivers are correctly loaded
> (parport_pc, parport and ppdev)
yes, it seems OK - see lsmod.txt
> Make sure parport is set to either SPP, or EPP
> No ECP mode!!! (check in BIOS)
checked, it is correct
> Make and load modules via ./MakeModule.sh DEBUG=y
> and after loading check (and show us) the output of
> dmesg, probably we'll find the problem
I see no trace of the operation in dmesg - see dmesg.txt
(copy of /var/log/dmesg)
Or, should it be in any other place?
Greetings :-)
Basia
> - Gerhard
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: ####@####.####
> For additional commands, e-mail: ####@####.####
>
Module Size Used by
nfs 202828 0
nfsd 197936 17
exportfs 5600 1 nfsd
lockd 54344 3 nfs,nfsd
nfs_acl 3584 2 nfs,nfsd
sunrpc 138812 13 nfs,nfsd,lockd,nfs_acl
lp 11012 0
button 6672 0
ac 5188 0
battery 9636 0
ipv6 226272 8
dm_snapshot 15552 0
dm_mirror 19152 0
dm_mod 50232 2 dm_snapshot,dm_mirror
ide_pnp 2560 0
ide_generic 1408 0 [permanent]
ide_floppy 16256 0
sermouse 5440 0
isofs 32540 0
ppdev 8676 0
ioatdma 9088 0 [unsafe]
raw 8608 0
drm 61332 0
paride 8224 0
nbd 20800 0
smbfs 57400 0
vfat 11872 0
msdos 8736 0
fat 46684 2 vfat,msdos
loop 15048 0
parport_pc 32132 1
parport 33256 4 lp,ppdev,paride,parport_pc
psmouse 35016 0
serio_raw 6660 0
i2c_piix4 8268 0
pcspkr 3072 0
i2c_core 19680 1 i2c_piix4
intel_agp 22204 1
agpgart 29896 2 drm,intel_agp
shpchp 33024 0
pci_hotplug 28704 1 shpchp
evdev 9088 1
ext3 119240 2
jbd 52456 1 ext3
mbcache 8356 1 ext3
ide_cd 36064 0
cdrom 32544 1 ide_cd
ide_disk 14848 4
generic 4868 0 [permanent]
8139too 25120 0
8139cp 21920 0
mii 5344 2 8139too,8139cp
piix 9444 0 [permanent]
uhci_hcd 21164 0
usbcore 112644 2 uhci_hcd
ide_core 110504 7 ide_pnp,ide_generic,ide_floppy,ide_cd,ide_disk,generic,piix
thermal 13608 0
processor 28840 1 thermal
fan 4804 0
Linux version 2.6.18-5-686 (Debian 2.6.18.dfsg.1-17) ####@####.#### (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Mon Dec 24 16:41:07 UTC 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000009ff0000 (usable)
BIOS-e820: 0000000009ff0000 - 0000000009ff3000 (ACPI NVS)
BIOS-e820: 0000000009ff3000 - 000000000a000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
159MB LOWMEM available.
On node 0 totalpages: 40944
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 36848 pages, LIFO batch:7
DMI not present or invalid.
ACPI: RSDP (v000 PCPART ) @ 0x000f6370
ACPI: RSDT (v001 AWARD AWRDACPI 0x30302e31 AWRD 0x00000000) @ 0x09ff3000
ACPI: FADT (v001 AWARD AWRDACPI 0x30302e31 AWRD 0x00000000) @ 0x09ff3040
ACPI: DSDT (v001 PCPART AWRDACPI 0x00001000 MSFT 0x0100000a) @ 0x00000000
ACPI: PM-Timer IO Port: 0x4008
Allocating PCI resources starting at 10000000 (gap: 0a000000:f5ff0000)
Detected 273.648 MHz processor.
Built 1 zonelists. Total pages: 40944
Kernel command line: root=/dev/hda1 ro
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (01149000)
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 4096 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 154688k/163776k available (1541k kernel code, 8552k reserved, 576k data, 196k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 548.05 BogoMIPS (lpj=1096115)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0080f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0080f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After all inits, caps: 0080f9ff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
ACPI: Core revision 20060707
ACPI: setting ELCR to 0200 (from 1c00)
CPU0: Intel Pentium II (Klamath) stepping 04
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
migration_cost=0
checking if image is initramfs... it is
Freeing initrd memory: 4397k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb3d0, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
* Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
* this clock source is slow. Consider trying other clock sources
PCI quirk: region 4000-403f claimed by PIIX4 ACPI
PCI quirk: region 5000-500f claimed by PIIX4 SMB
Boot video device is 0000:00:0f.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: Power Resource [PFAN] (on)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Bridge: 0000:00:01.0
IO window: d000-dfff
MEM window: disabled.
PREFETCH window: disabled.
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 4096)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1200914465.700:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
serial8250: ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
Using IPI No-Shortcut mode
ACPI: (supports S0 S1<6>Time: tsc clocksource has been installed.
S5)
Freeing unused kernel memory: 196k freed
input: AT Translated Set 2 keyboard as /class/input/input0
ACPI: Fan [FAN] (on)
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Thermal Zone [THRM] (22 C)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 11, io base 0x0000e000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
8139cp 0000:00:10.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
8139cp 0000:00:10.0: Try the "8139too" driver instead.
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
8139too Fast Ethernet driver 0.9.27
hda: Nikimi NIK-XR205A, ATA DISK drive
Time: acpi_pm clocksource has been installed.
hdb: CRD-8160B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hda: max request size: 128KiB
hda: 40132503 sectors (20547 MB) w/1900KiB Cache, CHS=39813/16/63, UDMA(33)
hda: cache flushes not supported
hda:ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 12
PCI: setting IRQ 12 as level-triggered
ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKB] -> GSI 12 (level, low) -> IRQ 12
eth0: RealTek RTL8139 at 0xe800, 00:00:00:00:00:00, IRQ 12
eth0: Identified 8139 chip type 'RTL-8101'
hda1 hda2 < hda5 hda6 >
hdb: ATAPI 16X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 440LX Chipset.
agpgart: AGP aperture is 64M @ 0xe0000000
input: PC Speaker as /class/input/input1
piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
Adding 248968k swap on /dev/hda5. Priority:-1 extents:1 across:248968k
EXT3 FS on hda1, internal journal
loop: loaded (max 8 devices)
nbd: registered device at major 43
[drm] Initialized drm 1.0.1 20051102
Module ioatdma cannot be unloaded due to unsafe usage in drivers/dma/ioatdma.c:829
ppdev: user-space parallel port driver
ide-floppy driver 0.99.newide
Probing IDE interface ide1...
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: ####@####.####
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
eth0: link up, 10Mbps, half-duplex, lpa 0x0000
