plustek: plustek-driver/Suse 7.1/Kernel 2.4.
Subject:
Re: plustek-driver/Suse 7.1/Kernel 2.4.
From:
####@####.####
Date:
20 Mar 2001 10:35:09 -0000
Message-Id: <14fGvy-25hJCKC@fwd03.sul.t-online.com>
Hi,
this is a common problem which appears when not having
set the link /usr/src/linux correctly. Please make sure, that
this link points to your kernel 2.4 sources (or at least to
its header files). The problem was, that the definitions for
PARPORT_MODE_xxx changed between the two kernel releases...
Check the settings, correct them and try it again.
Gerhard
>----- Ursprüngliche Nachricht -----
>Absender: ####@####.####
>Betreff: Re: plustek-driver/Suse 7.1/Kernel 2.4.
>Empfänger: ####@####.#### , ####@####.####
>Datum: 17. Mär 2001 17:18
>
> Hi,
>
>
> > in general, it should be possible to download a
> > plustek-module... tar-ball, unpack it anywhere and build
> > the driver. Please have a look at my homepage where you find
> > which version is suitable for SANE-1.0.4.
>
> installed sane 1.04 by yast, untared
> plustek-module_0_37_23 in my homedir.
>
> After "make" following error message is reported:
>
> I -D_PTDRV_BUILD=24 -D__KERNEL__ -I/usr/src/linux/include -I./h
-I./..
> -O2 -DMODULE -c src/misc.c -o obj/misc.o
> src/misc.c: In function `miscSetFastMode':
> src/misc.c:370: `PARPORT_MODE_PCECR' undeclared (first use in this
> function)
> src/misc.c:370: (Each undeclared identifier is reported only once
> src/misc.c:370: for each function it appears in.)
> src/misc.c:371: `PARPORT_MODE_PCECPEPP' undeclared (first use in
this
> function)
> src/misc.c:404: `PARPORT_MODE_PCECPPS2' undeclared (first use in
this
> function)
> src/misc.c:440: `PARPORT_MODE_PCPS2' undeclared (first use in this
> function)
> src/misc.c: In function `miscSetPortMode':
> src/misc.c:508: `PARPORT_MODE_PCEPP' undeclared (first use in this
> function)
> src/misc.c: In function `MiscRestorePort':
> src/misc.c:705: `PARPORT_MODE_PCECR' undeclared (first use in this
> function)
> make: *** [obj/misc.o] Error 1
>
> What goes wrong?
>
> Greetinx
> Thomas
>
>
>
---------------------------------------------------------------------
> To unsubscribe, e-mail: ####@####.####
> For additional commands, e-mail: ####@####.####
>
>