plustek: Pb with 12000P and V0.35
Subject:
Pb with 12000P and V0.35
From:
Florent Capdeville ####@####.####
Date:
26 May 2000 21:48:51 -0000
Message-Id: <m3ya4xq90r.fsf@pallas.flo.fr>
Hello everybody!
Here is the output I got for the command:
scanimage -d plustek > output.pnm
[plustek] ioctl _PTDRV_PUT_SCANNER_MODEL failed
scanimage: sane_start: Error during device I/O
[plustek] ioctl _PTDRV_STOP_SCAN failed
and the log:
pt_drv: init_module()
ptdrvInit(0)
Init settings done
ScanData = 0xc3c7c000
parport0: PC-style at 0x378, irq 7 [SPP,PS2,EPP]
parport1: PC-style at 0x278 [SPP]
parport0: no IEEE-1284 device present.
parport1: no IEEE-1284 device present.
Requested port (0x378) found
Port mode reported: (0x0007)
Port registered
ptdrvOpen(port=0x378)
Try to claim the parport
Using EPP-mode
Starting Scanner-Autodetection
************ DETECTP48xx ************
ModelSet4800()
modelInitPageSettings()
A4 set
ModelSet4800() done.
P48xxInitAsic()
DacInitialize()
ImageInitialize()
IOInitialize()
MotorInitialize()
Test 0x55
Test 0xAA
Compare data=0x7e and status=0xe, port=0x378
p48xxReadWriteTest()
Found a 96003 ASIC at Reg 0x13
ModelSet4830()
modelInitPageSettings()
A4 set
ModelSet4830() done.
p48xxDoTest()
found 131072 bytes of memory
tmpByte[0x18] = 0x02
tmpByte = 0x02, cntr = 128, AsicId = 0x10
ModelSet12000() done.
ModelSet9360()
modelInitPageSettings()
A4 set
ModelSet9630() done.
ModelSet12000() done.
It seems we have a 12000P/96000P
detectScannerConnection() returns 0.
p48xxSetupScannerVariables()
Status-Register = 0xA7
Scanner has Full/Half Stepping drive
CCD is SONY Type
*** setupBuffers ***
Driverbuf(170780 bytes) needed !
pColorRunTab = 0xc40ee52c
Switching lamp 0 on.
ptdrvClose()
*** cleanup buffers ***
MiscRestorePort()
- no need to restore portmode !
Releasing parport
pt_drv: driver version = 0.35, device 0 ready
pt_drv: 12000P/96000P found on port 0x0378
pt_drv: Lamp-Timer set to 180 seconds.
pt_drv: WarmUp period set to 30 seconds.
pt_drv: Lamp untouched on driver unload.
pt_drv: init done - OK
---------------------------------------------
pt_drv_open()
ioctl(_PTDRV_OPEN_DEVICE)
Lamp-Timer stopped !
Init settings done
ptdrvOpen(port=0x378)
Try to claim the parport
Using EPP-mode
Starting Scanner-detection for P48xx
************ DETECTP48xx ************
ModelSet4800()
modelInitPageSettings()
A4 set
ModelSet4800() done.
P48xxInitAsic()
DacInitialize()
ImageInitialize()
IOInitialize()
MotorInitialize()
Test 0x55
Test 0xAA
Compare data=0x7e and status=0xe, port=0x378
p48xxReadWriteTest()
Found a 96003 ASIC at Reg 0x13
ModelSet4830()
modelInitPageSettings()
A4 set
ModelSet4830() done.
p48xxDoTest()
found 131072 bytes of memory
tmpByte[0x18] = 0x02
tmpByte = 0x02, cntr = 128, AsicId = 0x10
ModelSet12000() done.
ModelSet9360()
modelInitPageSettings()
A4 set
ModelSet9630() done.
ModelSet12000() done.
It seems we have a 12000P/96000P
detectScannerConnection() returns 0.
p48xxSetupScannerVariables()
Status-Register = 0xA7
Scanner has Full/Half Stepping drive
CCD is SONY Type
*** setupBuffers ***
Driverbuf(170780 bytes) needed !
pColorRunTab = 0xc40ee52c
ioctl(_PTDRV_GET_CAPABILITES)
ioctl(_PTDRV_GET_LENSINFO)
ioctl(_PTDRV_STOP_SCAN)
Waiting for Sensor to be back in position
- done !
ioctl(_PTDRV_CLOSE_DEVICE)
*** cleanup buffers ***
Putting Scanner (ASIC 96001/3) into Idle-Mode
pt_drv_close()
ptdrvClose()
MiscRestorePort()
- no need to restore portmode !
Releasing parport
pt_drv_open()
ioctl(_PTDRV_OPEN_DEVICE)
Lamp-Timer stopped !
Init settings done
ptdrvOpen(port=0x378)
Try to claim the parport
Using EPP-mode
Starting Scanner-detection for P48xx
************ DETECTP48xx ************
ModelSet4800()
modelInitPageSettings()
A4 set
ModelSet4800() done.
P48xxInitAsic()
DacInitialize()
ImageInitialize()
IOInitialize()
MotorInitialize()
Test 0x55
Test 0xAA
Compare data=0x7e and status=0xe, port=0x378
p48xxReadWriteTest()
Found a 96003 ASIC at Reg 0x13
ModelSet4830()
modelInitPageSettings()
A4 set
ModelSet4830() done.
p48xxDoTest()
found 131072 bytes of memory
tmpByte[0x18] = 0x02
tmpByte = 0x02, cntr = 128, AsicId = 0x10
ModelSet12000() done.
ModelSet9360()
modelInitPageSettings()
A4 set
ModelSet9630() done.
ModelSet12000() done.
It seems we have a 12000P/96000P
detectScannerConnection() returns 0.
p48xxSetupScannerVariables()
Status-Register = 0xA7
Scanner has Full/Half Stepping drive
CCD is SONY Type
*** setupBuffers ***
Driverbuf(170780 bytes) needed !
pColorRunTab = 0xc40ee52c
ioctl(_PTDRV_GET_CAPABILITES)
ioctl(_PTDRV_GET_LENSINFO)
ioctl(_PTDRV_PUT_IMAGEINFO)
imageP96GetInfo()
xyPhyDpi.x = 50, xyPhyDpi.y = 50
crArea.x = 0, crArea.y = 0
crArea.cx = 1488, crArea.cy = 873
xyDpi.x = 50, xyDpi.y = 50
AppLinesPerArea = 145
AppPixelsPerLine = 248
AppPhyBytesPerLine = 744
AppBytesPerLine = 744
AsicPixelsPerPlane = 248
AsicBytesPerPlane = 248
AsicBytesPerLine = 248
Physical Bytes = 248
dwOffsetX = 0, dwOffsetY = 0
pt_drv_close()
ptdrvClose()
*** cleanup buffers ***
MiscRestorePort()
- no need to restore portmode !
Releasing parport
PS: I'm not familiar with mailing-lists, so don't hesitate to tell me
if I'm wrong!
