[<<] [<] Page 1 of 1 [>] [>>] | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Re: Problem opening Canon 670U in Plustek 0.45-3
From: David Sterratt ####@####.#### Date: 1 Feb 2003 00:58:14 -0000 Message-Id: <Pine.OSF.4.40.0302010046590.9622-100000@jura> OOOPS! I should have run ./configure in the sane-backends directory before running make -- I assumed it was already configured from compiling 0.44. All seems to be working now -- at least the scanner runs. Sorry about this. David | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Problem opening Canon 670U in Plustek 0.45-3
From: David Sterratt ####@####.#### Date: 1 Feb 2003 00:43:48 -0000 Message-Id: <1044059657.12623.2.camel@galaxy.bellevue> Hello all, My Canon 670U doesn't seem to start under Plustek 0.45-3 and sane 1.0.9 and a RedHat 8.0 system. It did previously work under 0.44. I've put the vendor ID in the config file and tried using both device auto and device libusb:001:002 (where sane-find-scanner tells me the scanner is located). The permissions are: # ls -l /proc/bus/usb/001/ total 1 -rw-r--r-- 1 root root 18 Feb 1 00:09 001 -rw-r--r-- 1 root root 18 Feb 1 00:09 002 Trying "/usr/local/bin/scanimage -L" as root with and device libsub:001:002 and export SANE_DEBUG_DLL=12 export SANE_DEBUG_PLUSTEK=20 gives the output at the end of the email (with device auto the output is the same exept for [plustek] usbDev_open(auto,0x04A9-0x220D) [plustek] No matching device found! [plustek] open failed: -1 The usbcore and usb-uhci kernel modules are loaded. Any help would be most appreciated. David [sanei_debug] Setting debug level of dll to 12. [dll] sane_init: SANE dll backend version 1.0.6 from sane-backends-1.0.9 ... [plustek] Plustek backend V0.45-3, part of sane-backends 1.0.9 [plustek] ># Plustek-SANE Backend configuration file< [plustek] ># For use with Plustek parallel-port scanners and< [plustek] ># LM9831/2/3 based USB scanners< [plustek] >#< [plustek] ># For parport devices use the parport section< [plustek] >#< [plustek] >[parport]< [plustek] next device is a PARPORT device [plustek] >device /dev/pt_drv< [plustek] Decoding device name >/dev/pt_drv< [plustek] >< [plustek] >#< [plustek] ># leave the default values as specified in /etc/modules.conf< [plustek] >#< [plustek] >option warmup -1< [plustek] Decoding option >warmup< [plustek] >option lOffOnEnd -1< plustek] Decoding option >lOffOnEnd< [plustek] >option lampOff -1< [plustek] Decoding option >lampOff< [plustek] >< [plustek] >< [plustek] >#< [plustek] ># The USB section:< [plustek] ># each device needs at least two lines:< [plustek] ># - [usb] vendor-ID and product-ID< [plustek] ># - device devicename< [plustek] ># i.e. for Plustek (0x07B3) UT12/16/24 (0x0017)< [plustek] ># [usb] 0x07B3 0x0017< [plustek] ># device /dev/usbscanner< [plustek] ># or< [plustek] ># device libusb:bbb:ddd< [plustek] ># where bbb is the busnumber and ddd the device number< [plustek] ># make sure that your user has access to /proc/bus/usb/bbb/ddd< [plustek] >#< [plustek] ># additionally you can specify some options< [plustek] ># warmup, lOffOnEnd, lampOff< [plustek] >#< [plustek] ># For autodetection use< [plustek] ># [usb]< plustek] ># device /dev/usbscanner< [plustek] >#< [plustek] ># or simply< [plustek] ># [usb]< [plustek] >#< [plustek] ># or if you want a specific device but you have no idea about< [plustek] ># the device node or you use libusb, simply set vendor- and product-ID< [plustek] ># [usb] 0x07B3 0x0017< [plustek] ># device auto< [plustek] >#< [plustek] ># NOTE: autodetection is safe, as it uses the info it got< [plustek] ># from the USB subsystem. If you're not using the< [plustek] ># autodetection, you MUST have attached that device< [plustek] ># at your USB-port, that you have specified...< [plustek] ># blee blee< [plustek] >< [plustek] >[usb] 0x04a9 0x220d< [plustek] attach (/dev/pt_drv, 0xbfffd2a0, (nil)) [plustek] Device configuration: [plustek] device name : >/dev/pt_drv< [plustek] porttype : 0 [plustek] USB-ID : >< plustek] warmup : -1s [plustek] lampOff : -1 [plustek] lampOffOnEnd : -1 [plustek] skipCalibr. : 0 [plustek] skipFine : 0 [plustek] skipFineWhite: 0 [plustek] invertNegs. : 0 [plustek] pos_x : 0 [plustek] pos_y : 0 [plustek] pos_shading_y: -1 [plustek] neg_x : 0 [plustek] neg_y : 0 [plustek] neg_shading_y: -1 [plustek] tpa_x : 0 [plustek] tpa_y : 0 [plustek] tpa_shading_y: -1 [plustek] red gain : -1 [plustek] green gain : -1 [plustek] blue gain : -1 [plustek] red Gamma : 1.00 [plustek] green Gamma : 1.00 [plustek] blue Gamma : 1.00 [plustek] gray Gamma : 1.00 plustek] >#< [plustek] ># options to tweak the image start-position< [plustek] ># (WARNING: there's no internal range check!!!)< [plustek] >#< [plustek] ># for the normal scan area< [plustek] >#< [plustek] >option posOffX 0< [plustek] Decoding option >posOffX< [plustek] >option posOffY 0< [plustek] Decoding option >posOffY< [plustek] >< [plustek] ># for transparencies< [plustek] >option tpaOffX 0< [plustek] Decoding option >tpaOffX< [plustek] >option tpaOffY 0< [plustek] Decoding option >tpaOffY< [plustek] >< [plustek] ># for negatives< [plustek] >option negOffX 0< [plustek] Decoding option >negOffX< [plustek] >option negOffY 0< [plustek] Decoding option >negOffY< [plustek] >< plustek] ># coarse calibration is done< [plustek] >option skipFine 0< [plustek] Decoding option >skipFine< [plustek] >< [plustek] ># discard the result of the fine white calibration< [plustek] >option skipFineWhite 0< [plustek] Decoding option >skipFineWhite< [plustek] >< [plustek] ># for replacing the gain values found during< [plustek] ># calibration< [plustek] >option red_gain -1< [plustek] Decoding option >red_gain< [plustek] >option green_gain -1< [plustek] Decoding option >green_gain< [plustek] >option blue_gain -1< [plustek] Decoding option >blue_gain< [plustek] >< [plustek] >#< [plustek] ># for adjusting the default gamma values< [plustek] >#< [plustek] >option redGamma 1.0< [plustek] Decoding option >redGamma< [plustek] >option greenGamma 1.0< plustek] ># to define a new device, start with a new section:< [plustek] ># [usb] or [parport]< [plustek] >#< [plustek] attach (libusb:001:004, 0xbfffd2a0, (nil)) [plustek] Device configuration: [plustek] device name : >libusb:001:004< [plustek] porttype : 1 [plustek] USB-ID : >0x04A9-0x220D< [plustek] warmup : 15s [plustek] lampOff : 300 [plustek] lampOffOnEnd : 1 [plustek] skipCalibr. : 0 [plustek] skipFine : 0 [plustek] skipFineWhite: 0 [plustek] invertNegs. : 0 [plustek] pos_x : 0 [plustek] pos_y : 0 [plustek] pos_shading_y: -1 [plustek] neg_x : 0 [plustek] neg_y : 0 [plustek] neg_shading_y: -1 [plustek] tpa_x : 0 [plustek] tpa_y : 0 [plustek] tpa_shading_y: -1 [plustek] red gain : -1 [plustek] green gain : -1 [plustek] blue gain : -1 [plustek] red Gamma : 1.00 [plustek] green Gamma : 1.00 [plustek] blue Gamma : 1.00 [plustek] gray Gamma : 1.00 [plustek] --------------------- [plustek] drvopen() [plustek] usbDev_open(libusb:001:004,0x04A9-0x220D) [plustek] open failed: -1 [dll] init: backend `plustek' is version 1.0.0 [plustek] sane_get_devices (0xbffff3b8, 0) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
[<<] [<] Page 1 of 1 [>] [>>] |