[<<] [<] Page 1 of 1 [>] [>>] | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
OpticPro 4800P on Mandrake 10
From: Gregor Koch ####@####.#### Date: 10 Sep 2004 16:11:41 +0100 Message-Id: <1094829125.4226.48.camel@FRODO> Hey, I will usethe Plustec OpticPro 4800P on Mandrake 10. In my dll.conf is only one line: plustek_pp This is my plustek_pp.conf: Plustek-PP SANE Backend configuration file # For use with Plustek parallel-port scanners # # # user either [direct] or [kernel] to access the scanner # when using [kernel], device specifies the device-node, which is created # by the kernel-module loader (applies only to Linux) # when using [direct], device is used to set the parallel-port base address # or a device-name suitable for libieee1284, i.e. parport0 # [direct] device 0x378 # # leave the default values as specified in /etc/modules.conf # option warmup -1 option lOffOnEnd -1 option lampOff -1 # model override switch, mostly for cosmetic changes, if the autodetection # does not work or could not work correctly #option mov 7 # # example for accessing the scanner via libieee1284 # [direct] device parport0 # # example for accessing the scanner via the kernel module # #[kernel] #device /dev/pt_drv # #option warmup -1 #option lOffOnEnd -1 #option lampOff -1 This Packages are installed: libsane1-1.0.13-6mdk libsane-hpoj1-0.91-4mdk sane-backends-1.0.13-6mdk sane-frontends-1.0.11-1mdk xsane-0.92-2mdk As ROOT I can connect the scanner (600P/6000P:parport0) with xsane (not with xscanimage), but I get only colored ord black and white lines. As normal user I can not connect the scanner (no scanner found) I hope you can help me Thanks very much Gregor | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
[<<] [<] Page 1 of 1 [>] [>>] |