[<<] [<] Page 1 of 1 [>] [>>] | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Genius ColorPage-Vivid Pro II
From: Alessandro Ohde ####@####.#### Date: 30 Jul 2002 15:31:21 -0000 Message-Id: <3D46AB1D.8020709@sbs.netis.com.br> Hello, I have a Genius ColorPage-Vivid Pro II paralell port scanner (EICI 119600 ASIC) that according to the plustek-module README file is supported, which I'd like to use under my Linux system (Slackware 8.0 + kernel 2.4.18), but I'm having problems loading pt_drv (plustek-module-0_42_9 + sane-1.0.8)... The BIOS parallel port is set to EPP mode, port 0x378. The parport module is compiled without IEEE 1284 transfer mode. The dmesg command reports the following after trying to modprobe pt_drv: ********************************************* pt_drv: init_module() pt_drv : driver version 0.42-10 ProcFsInitialize() ptdrvInit(0) Init settings done ScanData = 0xc3e70000 Using slow I/O Requested port at 0x378 parport0: PC-style at 0x378 [PCSPP(,...)] parport0: irq 7 detected Requested port (0x378) found Port mode reported: (0x0041) Port for device 0 registered ptdrvOpen(port=0x378) Try to claim the parport parport-modi: SPP Using SPP-mode Trying faster mode... Starting Scanner-Autodetection ************ DETECTP48xx ************ ModelSet4800() modelInitPageSettings() A4 set ModelSet4800() done. P48xxInitAsic() DacInitialize() ImageInitialize() IOFuncInitialize() IOInitialize() MotorInitialize() Dataport = 0x0378 Ctrlport = 0x037a Test 0x55 Test 0xAA Compare data=0x7e and status=0x7e, port=0x378 detectScannerConnection() returns -9021. ************* ASIC9800x ************* IOInitialize() ASIC = 0x77 Unknown ASIC-ID *** DETECTION DONE, result: -9020 *** ptdrvClose() MiscRestorePort() - no need to restore portmode ! Releasing parport ptdrvShutdown() cleanup device 0 Port unregistered ProcFsShutdown() pt_drv: proc del 'info' root='pt_drv' pt_drv: proc del 'pt_drv' root='/proc' pt_drv : no device(s) detected, (-9020) --------------------------------------------- I followed the installation procedures correctly and there are no hardware problems since the printer is working fine under Linux and the scanner works perfectly under Windows. Is there a solution to that problem? I have read part of the mailing list, found some similar problems, but no solution... Thanks in advance, best regards... Alessandro Ohde - Brazil | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Re: Genius ColorPage-Vivid Pro II
From: "Jaeger, Gerhard" ####@####.#### Date: 2 Aug 2002 08:44:58 -0000 Message-Id: <200208020838.KAA21210@kah.ulm.sysgo.de> Hi, On Dienstag, 30. Juli 2002 17:05, Alessandro Ohde wrote: > Hello, > > I have a Genius ColorPage-Vivid Pro II paralell port scanner (EICI 119600 > ASIC) that according to the plustek-module README file is supported, never heard of this ASIC, the supported ASICs are 96001 96003 98001 98003 So it doesn't make me wonder, that it won't work! I'm not sure which SANE driver supports this ASIC... Gerhard | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Re: Genius ColorPage-Vivid Pro II
From: Alessandro Ohde ####@####.#### Date: 2 Aug 2002 14:47:57 -0000 Message-Id: <3D4A97F6.1010704@sbs.netis.com.br> Jaeger, Gerhard wrote: > Hi, > > On Dienstag, 30. Juli 2002 17:05, Alessandro Ohde wrote: > >>Hello, >> >> I have a Genius ColorPage-Vivid Pro II paralell port scanner (EICI 119600 >>ASIC) that according to the plustek-module README file is supported, > > > never heard of this ASIC, the supported ASICs are > 96001 > 96003 > 98001 > 98003 > > So it doesn't make me wonder, that it won't work! I'm not sure which > SANE driver supports this ASIC... > > Gerhard > > . Hi, Well, in fact EICI 119600 is what is printed on the scanner's main chip, I don't know if that's the real ASIC model or just a manufacturer code. I tried the Primax Linux driver for the Primax Direct 9600, and the scanner showed some life, lamp on and motor working (badly) but no scans, only black images. I'd like to know if I really can use the plustek driver with this model (since the README file says so), or should I stick to the primax one? Does Genius use different ASICs with the same scanner model names? | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Re: Genius ColorPage-Vivid Pro II
From: "Jaeger, Gerhard" ####@####.#### Date: 2 Aug 2002 15:51:14 -0000 Message-Id: <17aeUG-0SOi9YC@fmrl02.sul.t-online.com> On Friday, 2. August 2002 16:32, Alessandro Ohde wrote: [SNIP] > Well, in fact EICI 119600 is what is printed on the scanner's main chip, > I don't know if that's the real ASIC model or just a manufacturer code. > I tried the Primax Linux driver for the Primax Direct > 9600, and the scanner showed some life, lamp on and motor working > (badly) but no scans, only black images. I'd like to know if I really > can use the plustek driver with this model (since the README file says > so), or should I stick to the primax one? Does Genius use different > ASICs with the same scanner model names? > So if the Primax driver shows up any functionality, proceed with this driver. It seems, that Genius uses different hardware in the same model. Bad practice, but Plustek also does this in their USB models U12 and UT12... Sorry but that's all I can do for you Gerhard | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Re: Genius ColorPage-Vivid Pro II
From: "Alexandre Magno" ####@####.#### Date: 18 Sep 2007 20:09:04 +0100 Message-Id: <6ac5e1e70709180920l27fd69ccm235120e72e31e769@mail.gmail.com> Hi, I have a TCE S540 paralell port scanner and I have used it in Windows XP with Genius ColorPage Vivid Pro II driver with parcial success (scan but it needs as a successive heating with three scanss without success). You to observes his ASIC is EICI 093900, it is not an EICI 119600. I want the EiCI 093900 datasheet or other document what describes the scanner funcionality. I want to continue the primax.sourceforge.net source code. Some say to have had success with TCE S540 to using Visonner 2400u's driver in Windows XP. Others they say that the ASIC is the same of the Primax Colorado 1200p scanner. I have attemped to contact drivers programmers and components manufactures for documetação search. I tried the Primax Linux driver for the Primax Direct 9600, but the scanner don't showed any life, lamp on and motor don't working. I tried the pxscansane_0.41 (sane backend for Primax Direct 600), and the scanner showed some life, lamp on and motor working (badly). Idea? Alexandre Magno PS.: english is not my native language. Subject: Re: Genius ColorPage-Vivid Pro II From: Alessandro Ohde Date: Fri, 02 Aug 2002 11:32:22 -0300 Jaeger, Gerhard wrote: > Hi, > > On Dienstag, 30. Juli 2002 17:05, Alessandro Ohde wrote: > >>Hello, >> >> I have a Genius ColorPage-Vivid Pro II paralell port scanner (EICI 119600 >>ASIC) that according to the plustek-module README file is supported, > > > never heard of this ASIC, the supported ASICs are > 96001 > 96003 > 98001 > 98003 > > So it doesn't make me wonder, that it won't work! I'm not sure which > SANE driver supports this ASIC... > > Gerhard > > . Hi, Well, in fact EICI 119600 is what is printed on the scanner's main chip, I don't know if that's the real ASIC model or just a manufacturer code. I tried the Primax Linux driver for the Primax Direct 9600, and the scanner showed some life, lamp on and motor working (badly) but no scans, only black images. I'd like to know if I really can use the plustek driver with this model (since the README file says so), or should I stick to the primax one? Does Genius use different ASICs with the same scanner model names? | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Re: Genius ColorPage-Vivid Pro II
From: Gerhard Jaeger ####@####.#### Date: 1 Oct 2007 07:49:34 +0100 Message-Id: <200710010849.44090.gerhard@gjaeger.de> Hi, I'm pretty sure that I could be of no help for you, as I already mentioned that the plustek code only deals with ASICs like the 96001, 96003, 98001 and the 98003 Sorry, Gerhard On Dienstag, 18. September 2007, Alexandre Magno wrote: > Hi, > > I have a TCE S540 paralell port scanner and I have used it in Windows > XP with Genius ColorPage Vivid Pro II driver with parcial success > (scan but it needs as a successive heating with three scanss without > success). You to observes his ASIC is EICI 093900, it is not an EICI > 119600. I want the EiCI 093900 datasheet or other document what > describes the scanner funcionality. I want to continue the > primax.sourceforge.net source code. > > Some say to have had success with TCE S540 to using Visonner 2400u's > driver in Windows XP. Others they say that the ASIC is the same of the > Primax Colorado 1200p scanner. I have attemped to contact drivers > programmers and components manufactures for documetação search. > > I tried the Primax Linux driver for the Primax Direct 9600, but the > scanner don't showed any life, lamp on and motor don't working. > > I tried the pxscansane_0.41 (sane backend for Primax Direct 600), and > the scanner showed some life, lamp on and motor working (badly). > > Idea? > > Alexandre Magno > > PS.: english is not my native language. > > > Subject: Re: Genius ColorPage-Vivid Pro II > From: Alessandro Ohde > Date: Fri, 02 Aug 2002 11:32:22 -0300 > > Jaeger, Gerhard wrote: > > Hi, > > > > On Dienstag, 30. Juli 2002 17:05, Alessandro Ohde wrote: > > > >>Hello, > >> > >> I have a Genius ColorPage-Vivid Pro II paralell port scanner (EICI 119600 > >>ASIC) that according to the plustek-module README file is supported, > > > > > > never heard of this ASIC, the supported ASICs are > > 96001 > > 96003 > > 98001 > > 98003 > > > > So it doesn't make me wonder, that it won't work! I'm not sure which > > SANE driver supports this ASIC... > > > > Gerhard > > > > . > > > Hi, > > Well, in fact EICI 119600 is what is printed on the scanner's main chip, > I don't know if that's the real ASIC model or just a manufacturer code. > I tried the Primax Linux driver for the Primax Direct > 9600, and the scanner showed some life, lamp on and motor working > (badly) but no scans, only black images. I'd like to know if I really > can use the plustek driver with this model (since the README file says > so), or should I stick to the primax one? Does Genius use different > ASICs with the same scanner model names? > > --------------------------------------------------------------------- > To unsubscribe, e-mail: ####@####.#### > For additional commands, e-mail: ####@####.#### > > | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
[<<] [<] Page 1 of 1 [>] [>>] |