[<<] [<] Page 1 of 1 [>] [>>] | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Re: Plustek OpticPro 12000T - solved
From: Jastra ####@####.#### Date: 30 Jan 2008 12:20:15 -0000 Message-Id: <Pine.LNX.4.64.0801301301300.18491@infoserve.pl> Hi :-) Finally the problem seems solved. It was necessary to remove sysklogd and install syslog-ng instead. It has resulted correct system messages recording. Then I have created /dev/pt_drv* devices manually. Then, it was necessary to load the module with command: insmod /lib/..full../path../to../the/drivers/parport/pt_drv.ko without the full path insmod reported "no such file or directory" Later, it was only necessary to check configuration of /etc/sane.d/dll.conf (enable plustek_pp) /etc/sane.d/plustek_pp.conf (enable kernel module mode) Sane was installed from Debian Etch package. As result I can scan from GIMP. I am not sure, what will happen after restart, but that is minor problem. So, the problem source was in system logging daemon. Well... life... Hope it will be useful for somebody in future. Many thanks for your time Best greetings Basia | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Re: Plustek OpticPro 12000T - solved
From: Gerhard Jaeger ####@####.#### Date: 31 Jan 2008 19:20:16 -0000 Message-Id: <200801312019.36620.gerhard@gjaeger.de> On Wednesday 30 January 2008 13:19:50 Jastra wrote: > Hi :-) > > Finally the problem seems solved. > It was necessary to remove sysklogd and install syslog-ng instead. It has > resulted correct system messages recording. > > Then I have created /dev/pt_drv* devices manually. > > Then, it was necessary to load the module with command: > > insmod /lib/..full../path../to../the/drivers/parport/pt_drv.ko > > without the full path insmod reported "no such file or directory" > > Later, it was only necessary to check configuration of > /etc/sane.d/dll.conf (enable plustek_pp) > /etc/sane.d/plustek_pp.conf (enable kernel module mode) > Sane was installed from Debian Etch package. > > As result I can scan from GIMP. > > I am not sure, what will happen after restart, but that is minor problem. > > So, the problem source was in system logging daemon. Well... life... > Hope it will be useful for somebody in future. Thanks for reporting, have fun Gerhard | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Re: Plustek OpticPro 12000T - solved
From: Jastra ####@####.#### Date: 1 Feb 2008 10:02:17 -0000 Message-Id: <Pine.LNX.4.64.0802011100090.14704@infoserve.pl> Final cosmetics to make devices and load the module on startup: I have made text file named "plustek" #! /bin/sh mknod -m 0664 /dev/pt_drv c 40 0 mknod -m 0664 /dev/pt_drv0 c 40 0 mknod -m 0664 /dev/pt_drv1 c 40 1 mknod -m 0664 /dev/pt_drv2 c 40 2 mknod -m 0664 /dev/pt_drv3 c 40 3 insmod /lib/modules/2.6.18-5-686/kernel/drivers/parport/pt_drv.ko copied it to /etc/init.d and made it executable. Then, I have run command: update-rc.d plustek defaults to make all necessary links to all runlevels directories. That is all - it is possible to forget about the module for some time. Best greetings Basia | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
[<<] [<] Page 1 of 1 [>] [>>] |