gnupic: ICD
Subject:
Re: ICD
From:
Alessandro Zummo ####@####.####
Date:
17 Nov 2002 11:38:36 -0000
Message-Id: <yam9086.1456.143559448@mail.galactica.it>
On 16-Nov-02 at 18:07:42,
Ralf Forsberg ####@####.#### wrote:
> On Fri, Nov 15, 2002 at 09:16:54PM +0100, Niklas Wennerstrand wrote:
>>
>> If you want Microchip ICD2 to work under linux with Microchip USB
>> firmware in the cypress chip then you have to have a USB analyser
>> snooping the messages and a USB analyser is not something that ordinary
>> mortals can afford.
> I found this:
> http://sourceforge.net/projects/usbsnoop/
> I have no idea if it would work. Perhaps someone with a ICD2 could
> try it out.
usbsnoop is a very useful software, but doesn't work
on every version of windows. i used it succesfully to develop
a Linux driver.. i think i was running winblows 95 at that time.
my opinion is that Microchip tunnelled on USB
the same protocol used on the serial cable.. it's a quite
common option.
If this is the case, i could write the necessary support in
the kernel to expose the ICD to the userland.
To start, we need someone with an ICD2 and a Linux
machine to provide us with some useful data:
cat /proc/bus/usb
or
lsusb.
--
- alex.