gnupic: erase flash device with PICP
Subject:
Re: erase flash device with PICP
From:
Andrew Pines ####@####.####
Date:
25 Nov 2002 12:15:21 -0000
Message-Id: <C83BCD4A-006E-11D7-9866-003065767C2C@cosmodog.com>
I'm aware of this problem but I've never used a flash device so I've
never actually tested it (so it's sort of surprising it works at all,
eh?). I will buy a 16F877 and figure this out. As I understand it (as
Declan stated) flash erase works, but it reports that it fails. Does
anyone have any more detail on picp's behavior with flash devices
before I start tracking it down?
-Andrew
On Monday, November 25, 2002, at 03:35 AM, Declan Moriarty wrote:
> On Saturday 23 November 2002 22:33, you wrote:
>> Yes,
>>
>> Excuse for the confusion, I really installed the software and had a
>> Wrong connection, but I wrote a mail before test all capabilities of
>> picp.
>>
>> Everything seens running ok, but I can't to erase a flash device.
>
>
> picp |more
>
> That gives you all the instructions. The erase code is
> picp <comport> <device> -ep
>
> All instrructions are the same format except for the switch at the
> end. It
> bartfs on an erase of a 16f877 for me with my firmware (check yours
> with the
> -v option) but actually performs it.
>
>
> --
> Regards,
>
> Declan Moriarty
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: ####@####.####
> For additional commands, e-mail: ####@####.####
