gnupic: erase flash device with PICP
Subject:
Re: erase flash device with PICP
From:
"TREVOR WHITE" ####@####.####
Date:
25 Nov 2002 14:26:36 -0000
Message-Id: <F22H2uXuJil67c7XNJq00004e18@hotmail.com>
I am sure this has already been done but has anyone asked MicroChip for the
codes?
Trevor White
----Original Message Follows----
From: Antonio Augusto Todo Bom Neto ####@####.####
To: Declan Moriarty ####@####.####
CC: gnupic list ####@####.####
Subject: Re: erase flash device with PICP
Date: 25 Nov 2002 12:15:30 -0200
MIME-Version: 1.0
Received: from linuxhacker.org ([208.219.23.228]) by
mc4-f15.law16.hotmail.com with Microsoft SMTPSVC(5.0.2195.5600); Mon, 25 Nov
2002 06:14:48 -0800
Received: (qmail 8624 invoked by alias); 25 Nov 2002 14:19:46 -0000
Received: (qmail 8619 invoked by uid 0); 25 Nov 2002 14:19:45 -0000
Mailing-List: contact ####@####.#### run by ezmlm
Precedence: bulk
X-No-Archive: yes
list-help: ####@####.####
list-unsubscribe: ####@####.####
list-post: ####@####.####
Delivered-To: mailing list ####@####.####
In-Reply-To: ####@####.####
References: ####@####.####
####@####.####
Organization: LAX Eletrônica e Telecomunicações Ltda.
Message-Id: ####@####.####
X-Mailer: Ximian Evolution 1.2.0
Return-Path: ####@####.####
X-OriginalArrivalTime: 25 Nov 2002 14:14:49.0034 (UTC)
FILETIME=[038802A0:01C2948D]
Em Seg, 2002-11-25 às 07:35, Declan Moriarty escreveu:
> picp |more
>
> That gives you all the instructions. The erase code is
> picp <comport> <device> -ep
>
> All instrructions are the same format except for the switch at the end.
It
> bartfs on an erase of a 16f877 for me with my firmware (check yours with
the
> -v option) but actually performs it.
It doesn't work:
[antonio@axc antonio]$ picp /dev/ttyS1 16f877 -rc
configuration bits: 0x0400
[antonio@axc antonio]$ picp /dev/ttyS1 16f877 -ep
program memory: not blank
failed to erase program space
[antonio@axc antonio]$
There is a special procedure to erase all flash device. I just don't
know what is the protocol to say to PicStart Plus to do it.
We need to do a reverse engeneering, on MPLAB 5.70 (min.) that has a
specific bottom with label "ERASE FLASH DEVICE"
Do anydbody know about a M$-WINDOWS program to capture the Serial port?
Here I have the flash devices and MPLAB 5.70 and MPLAB 6. So I can do
it.
Best regards,
Antonio Augusto Todo Bom Neto
LAX Eletronica e Telecomunicacoes Ltda
gEDA-BR - Users Group - http://gedabr.projetos.etc.br
Chave Publica no Site
www.keyserver.net chave de Antonio Augusto Todo Bom Neto
ou tente pelo ID 5F7C385C, ou pelo link abaixo:
http://search.keyserver.net:11371/pks/lookup?op=get&search=0x5F7C385C&template=netenextract,netennomatch,netenerror
Fingerprint = 10C2 FEF8 0462 A985 E1AF F28C C58E 4BA5 5F7C 385C
<< signature.asc >>
_________________________________________________________________
MSN 8 with e-mail virus protection service: 2 months FREE*
http://join.msn.com/?page=features/virus
