gnupic: gpsim logging writes to IO ports
Subject:
Re: gpsim logging writes to IO ports
From:
Ralf Forsberg ####@####.####
Date:
10 Feb 2003 11:57:40 -0000
Message-Id: <20030209123846.GA7897@home.se>
On Sun, Feb 09, 2003 at 11:25:01AM +0000, Alex Holden wrote:
>
> Now I'm attempting to write a module with very little experience of
> coding in C++. I don't suppose anyone's written a "subtitles for the
> hard of thinking" guide to writing gpsim modules have they? I want my
> module to be able to:
>
> * Watch the state of some digital input pins, and read the cycle counter
> when they change.
> * Control the state of some digital output pins from the background
> simulation.
You could look at the modules/logic.cc module.
> * Get called every "n" processor simulation cycles (or getting called
> once every cycle would do) to do some background simulation work, and be
> able to read the processor cycle counter from here also.
Try gpsim_set_break_delta(). (Example in InputPort::callback(),
paraface.cc.)
> * Write data to the log (Ok, the module itself could open a file and log
> to it, but it'd be nicer to use the Gpsim log facility).
There is module1(int) and module2(int,int), but those are kinda limited
and shared by all modules...
> * Get notified when the processor has been reset so I can also reset my
> simulation.
Add a gpsimInterface::reset(), and call gi.reset() from
pic_processor::reset(). Then use gpsim_register_interface() and
gpsim_register_reset() from your module. (I can implement this in gpsim
if you want).
/ Ralf
