gnupic: pulse counting using timer1
Subject:
Re: pulse counting using timer1
From:
Phil ####@####.####
Date:
9 Apr 2004 05:06:13 +0100
Message-Id: <200404071431.35249.phil@spiderweb.com.au>
On Tue, 6 Apr 2004 22:32, Pete Harlow wrote:
> I had some spurious behaviour on one 16F877 design that turned out to be
> that I had not disabled Low Voltage Programming. Make sure this is off
> in your configuration word.
>
Thanks for the reply Pete,
This is my configuration word:
__CONFIG _WDT_OFF & _XT_OSC & _CP_OFF & _LVP_OFF
However, I'm not sure that LVP is actually turned off. I'm using pikdev and
it's programming window shows that code protection is turned on even though
my config word sets code protection to off. The way that I understand it, the
configuration panel shows LVP as off.
Perhaps pikdev's programming window doesn't reflect the contents on the config
word. I found pikdev's config settings confusing when I first began
experimenting with PICs; I'll experiment with the config settings a little
more.
--
Regards,
Phil.