gnupic: Re: [gnupic] MPLAB ICD2
Subject:
Re: [gnupic] MPLAB ICD2
From:
Iain Dooley ####@####.####
Date:
19 Apr 2005 23:36:58 +0100
Message-Id: <4266167D.70605@iaindooley.com>
okay, so potentially, i could get into the code and modify it to run with the ICD2 USB programmers that the university already owns? if i started to do this, would you be able to provide me with advice along the way? i've got a few other projects on at the moment, but this would be pretty interesting.
where would i start? is there some standard specification for messages sent to an ICD device? when you say 'the hardware signals are configurable', does this mean that i could potentially just add in a module to GPICD that sends over serial instead of parallel and then configure the hardware signals to conform to any serial/USB device as per required?
cheers
iain
Sylvain Giroudon wrote:
> I use the home-made hardware interface described in the GPICD web site.
> The hardware signals are all configurable, in order to potentially use
> any parallel port base ICSP interface. The most famous is probably the
> one described in the Microchip app note AN589, available from the
> microchip web site.
>
> Sylvain
>
> On Tue, 2005-04-19 at 21:23, b1qpkf62 wrote:
>
>>What hardware do you use with GPICD? Can you provide a URL to one that is
>>pre-built?
>>Thanks,
>>Frank
>>
>
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: ####@####.####
> For additional commands, e-mail: ####@####.####
