gnupic: Re: [PIC] LPLAB testing with ICD2
Subject:
FW: [PIC] LPLAB testing with ICD2
From:
Chen Xiao Fan ####@####.####
Date:
26 May 2005 03:12:06 +0100
Message-Id: <3B8AEFFADD3DD4118F8100508BACEC2C07F77223@spex>
My first post to the GNUPIC list. This is a message posted to PICLIST.
-----Original Message-----
From: Chen Xiao Fan
Sent: Thursday, May 26, 2005 7:54 AM
To: 'Microcontroller discussion list - Public. (E-mail)'
Subject: RE: [PIC] LPLAB testing with ICD2
The similar test under Linux (Ubuntu 5.04 Hoary).
LPLAB:
http://www.landamore.com/pic.html
Command line tools to support ICD1, ICD2, Promate II and others,
under Linux and Windows
Test environment:
Ubuntu Linux 5.04, MPLAB-ICD2 connected to serial port COM1
Test hex file: wisp628.hex from Wouter for a 16F628A
(test on Windows is done for a 16F819).
1) lplab-dasm: disassembly works
2) lplab-dbg: ICD2 debugging not supported by LPLAB now
3) lplab-maintain: works, downgrade the firmware to Version 6.43
(icd01020411.hex)
4) lplab-showid: works, reads out the configuration bits and ID codes.
5) lplab-prog: partially working, programs the chip but can not read out
-e erase: working
-v: working
-b: working
-w: working, sometimes working, sometimes not
-r: not working, program stops there for quite long time.
So it is not working since you can not read it out for verification.
A missing verify feature is the next thing to do.
6) lplab-chk: hex file checking utility, working with 16F628A
Xiaofan