gnupic: Re: [gnupic] PIC under Linux developpement Howto


Previous by date: 6 Jul 2005 03:53:48 +0100 Re: [gnupic] PIC under Linux developpement Howto, Chen Xiao Fan
Next by date: 6 Jul 2005 03:53:48 +0100 gpsim + 12F629, Nestor A. Marchesini
Previous in thread: 6 Jul 2005 03:53:48 +0100 Re: [gnupic] PIC under Linux developpement Howto, Chen Xiao Fan
Next in thread:

Subject: Re: [gnupic] PIC under Linux developpement Howto
From: Byron A Jeff ####@####.####
Date: 6 Jul 2005 03:53:48 +0100
Message-Id: <20050706025330.GA15233@cleon.cc.gatech.edu>

On Tue, Jul 05, 2005 at 06:53:08PM -0500, Mark Rages wrote:
> On 7/5/05, Byron A Jeff ####@####.#### wrote:
> > >  * for a programmer - probably best to pick one that:
> > >     - has minimal parts count
> > >     - can work via serial port (PCs usually have 2 serial ports but only
> > >       one parallel port, and the parport is often in use with a printer)
> > >     - has PCB artwork and parts list, plus working Linux-compatible
> > >       on-chip and on-host programming software, freely downloadable from
> > >       the net (I bought a great programmer kit from Jaycar, but can't
> > >       recommend this because Jaycar only has stores in Aus and NZ, and
> > >       this would be a pain for people in other countries)
> > 
> > Programmers are a tough issue. With the decline of the serial port, serial
> > programmers are becoming relegated to USB or to using USB to serial cables.
> > Neither guarantee compatibility across all potential programmers.
> > 
> > I'm planning on designing a simple, cheap programmer that works with any
> > 3 wire serial port. So it should be usable with any USB-serial cable without
> > worries about modem control.
> 
> Why not use the PicKit?  It's a fast and gentle introduction to the
> PIC.  It is designed for the purpose (teaching newbies).  It is cheap
> and widely available.  It is USB. It is supported under Linux. It
> supports a large section of 16F midrange parts.

Because I learned a long long time ago that programmers in and of themselves
are not the least bit interesting. For several years their only purpose has
been to dump bootloaders into chips.

So personally I have long thought of programmers as throwaway. $35 for a 
PicKit isn't throwaway.

Personally I don't need a programmer. Maybe the PicKit will be useful for
newbies though.

BTW here is a PicKit 1 with Linux page:

http://charm.cs.uiuc.edu/users/olawlor/projects/2003/microchip

BAJ

Previous by date: 6 Jul 2005 03:53:48 +0100 Re: [gnupic] PIC under Linux developpement Howto, Chen Xiao Fan
Next by date: 6 Jul 2005 03:53:48 +0100 gpsim + 12F629, Nestor A. Marchesini
Previous in thread: 6 Jul 2005 03:53:48 +0100 Re: [gnupic] PIC under Linux developpement Howto, Chen Xiao Fan
Next in thread:


Powered by ezmlm-browse 0.20.