gnupic: Re: [gnupic] sdcc/PIC howto, first draft is up
Subject:
Re: [gnupic] sdcc/PIC howto, first draft is up
From:
Byron A Jeff ####@####.####
Date:
24 Jul 2005 14:59:40 +0100
Message-Id: <20050724135936.GA16743@cleon.cc.gatech.edu>
On Sun, Jul 24, 2005 at 11:03:32AM +0100, Peter Onion wrote:
> On Tue, 2005-07-19 at 20:52 +0100, Peter Onion wrote:
>
> > I'm concentrating on getting my programmer to the state where it will
> > program the 18F458s I have sitting on the desk ! Then I can really
> > start to see what's what with sdcc.
>
> !!!SUCCESS!!!
Congratulations!!
>
> I've finally got my programmer to put the sdcc "blink a led" code into a
> 18F458 and, once I added the config setting by hand into the hex file,
> it's WORKING !!!!
Cool.
>
> OH , and hey kids, don't forget to disable low voltage programming if
> you don't use it and don't have anything connected to the LVP PGM pin !
That's a requirement Peter. The LVP pin should be pulled down with a
10K resistor if you're doing high voltage programming.
BAJ
