gnupic: Re: [gnupic] xwisp2 1.7.01 released
Subject:
Re: [gnupic] xwisp2 1.7.01 released
From:
Xiaofan Chen ####@####.####
Date:
20 Sep 2005 00:01:21 +0100
Message-Id: <a276da400509170703450d2cb0@mail.gmail.com>
It turned out that the OSCCAL is somewhat erased (maybe when I
was testing python-pickit) and that caused the programmed chip
not working. I have to boot into windows and regenerate the OSCCAL
value again.
Still the verification caused false alarm.
Regards,
Xiaofan
E:\Coding\XWISP2171>xwisp2w port 2 erase
xwisp2 version 1.7.01 (Sep 16 2005, Open Watcom C 1.30)
Programmer Wisp628, firmware version 1.09
Detected target: 12F675 revision 03 (ID=0FC3)
Target erased
xwisp2 terminated successfully in 1.50 seconds
E:\Coding\XWISP2171>xwisp2w port 2 write test6752internalmclr.hex
xwisp2 version 1.7.01 (Sep 16 2005, Open Watcom C 1.30)
File test6752internalmclr.hex loaded and is Intel Hex format conforming
Programmer Wisp628, firmware version 1.09
Detected target: 12F675 revision 03 (ID=0FC3)
Transferring image to 12F675 via Wisp628
Transferring program memory...OK!
Transferring ID memory........OK!
Transferring data memory......OK!
Transferring fuses memory.....OK!
Write terminated successfully in 1.16 seconds
xwisp2 terminated successfully in 2.31 seconds
E:\Coding\XWISP2171>xwisp2w port 2 verify test6752internalmclr.hex
xwisp2 version 1.7.01 (Sep 16 2005, Open Watcom C 1.30)
File test6752internalmclr.hex loaded and is Intel Hex format conforming
Programmer Wisp628, firmware version 1.09
Detected target: 12F675 revision 03 (ID=0FC3)
Verifying program memory......OK!
Verifying ID memory...........OK!
Verifying data memory.........OK!
Verifying fuses memory........failed at 00400E, expected: 'C43F', found: 'C431'
Verify failed after 0.28 seconds, rc 21!
xwisp2 failed after 1.44 seconds, rc 21!
