gnupic: Re: [gnupic] xwisp2 1.7.01 released
Subject:
Re: [gnupic] xwisp2 1.7.01 released
From:
Xiaofan Chen ####@####.####
Date:
20 Sep 2005 02:05:40 +0100
Message-Id: <a276da400509170632e335514@mail.gmail.com>
The following state6752.hex may be problematic.
mcuee@ubuntu:~/Desktop/build/xwisp2/xwisp2171s$ ./xwisp2u port
/dev/ttyS1 write state6752.hex
xwisp2 version 1.7.01 (Sep 17 2005, GCC 3.3)
File state6752.hex loaded and is Intel Hex format conforming
Programmer Wisp628, firmware version 1.09
Detected target: 12F675 revision 03 (ID=0FC3)
Transferring image to 12F675 via Wisp628
Transferring program memory...OK!
Transferring ID memory........OK!
Transferring data memory......OK!
Transferring fuses memory.....OK!
Write terminated successfully in 1.13 seconds
xwisp2 terminated successfully in 2.11 seconds
mcuee@ubuntu:~/Desktop/build/xwisp2/xwisp2171s$ ./xwisp2u port
/dev/ttyS1 verify state6752.hex
xwisp2 version 1.7.01 (Sep 17 2005, GCC 3.3)
File state6752.hex loaded and is Intel Hex format conforming
Programmer Wisp628, firmware version 1.09
Detected target: 12F675 revision 03 (ID=0FC3)
Verifying program memory......OK!
Verifying ID memory...........OK!
Verifying data memory.........OK!
Verifying fuses memory........failed at 00400E, expected: 'AC3F', found: 'AC31'
Verify failed after 0.29 seconds, rc 21!
xwisp2 failed after 1.27 seconds, rc 21!
mcuee@ubuntu:~/Desktop/build/xwisp2/xwisp2171s$ ./xwisp2u verbose port
/dev/ttyS1 verify state6752.hex
xwisp2 version 1.7.01 (Sep 17 2005, GCC 3.3)
Will be using port /dev/ttyS1 at 19200 bps
Reading file 'state6752.hex'
File state6752.hex loaded and is Intel Hex format conforming
Total of program and data memory: 224 bytes
Using serial port /dev/ttyS1
Portspeed min: 50, max: 115200, cur: 19200
DTR On, RTS Off
DTR Off, RTS Off
Portspeed min: 50, max: 115200, cur: 19200
Programmer Wisp628, firmware version 1.09
Switching Wbus speed from 19200 to 115200 bps
Portspeed min: 50, max: 115200, cur: 19200
Portspeed new: 115200
Trying 14 bits core family (provisional target 12F629)
Detected target: 12F675 revision 03 (ID=0FC3)
Programming algorithm 4 (PIC16C)
Preserving contents of address 400E : 31AC
Preserving contents of address 07FE : 3FFF
Verifying program memory......OK!
Verifying ID memory...........OK!
Verifying data memory.........OK!
Verifying fuses memory........failed at 00400E, expected: 'AC3F', found: 'AC31'
Verify failed after 0.29 seconds, rc 21!
