gnupic: Re: MCHPFSUSB AN950, AN956, ...
Subject:
Re: MCHPFSUSB AN950, AN956, ...
From:
John Swensen ####@####.####
Date:
13 Nov 2005 00:44:14 +0000
Message-Id: <loom.20051113T014038-954@post.gmane.org>
Easy B <easy-b <at> freesurf.ch> writes:
>
> Hi John
>
> I saw that you use the 18f4455. What other changes did you perform?
> While building Julians code the SIGABRT is gone now. But instead I
> get a SIGSEGV while compiling usbctrltrf.c. I just don't get why sdcc
> crashes with one code and with the other one it doesn't.
>
> Cheers,
> Ezra.
>
> Am 12.11.2005 um 07:50 schrieb John Swensen:
>
>
I went back and did a diff on my sources and realized that mine is derived from
the Hitech-C port found at http://www.microchipc.com/sourcecode/ , not the one
linked to in this thread. I am pretty sure the only things I changed was some
#includes and the definition of #define rom in the system/typedefs.h file and
change the slashes in all the #include directives in all files. There was also
some bracketing issues in the static declarations of the descriptors in
autofiles/autodsc.c.
If there were any other changes, I think they were pretty trivial. Like I said
though, I haven't had a chance to test it yet. My whole reason for working on
this is because I want to create a single chip low-voltage ICSP that uses USB
for those other Mac users (an others) who don't have a serial or parallel port.
You could put a charge pump on the board and do non-lowvoltage too, using only
the power supplied by the USB bus.
I actually was able to get this to compile for 18f2450/2455/2550/2555 also.
John