gnupic: MPLAB ICD2 under Linux
Subject:
Re: MPLAB ICD2 under Linux
From:
Nicolas ####@####.####
Date:
14 Dec 2005 16:27:07 +0000
Message-Id: <92d8b98a0512140827l7b3a8b52j97d1b862a14e5fa7@mail.gmail.com>
I'd like to make you aware that I just released a new version of
piklab (cf http://piklab.sourceforge.net ) that supports ICD2
programmer both with serial and USB port.
I'd love to have feedback !!!
Regards,
Nicolas
On 11/30/05, Xiaofan Chen ####@####.#### wrote:
> Hope this is interesting to both lists.
>
> http://forum.microchip.com/tm.asp?m=125019
> http://www.hcilab.org/resources/particles/particles-linux-mplab-howto.htm
> http://www.hcilab.org/resources/download/icd2prog-0.1.tar.gz
>
> Regards,
> Xiaofan
>
> >From the site:
> http://www.hcilab.org/resources/particles/particles-linux-mplab-howto.htm
> Particle Programming using the MPLAB ICD2 with Linux
> Please see our Particle How-To page for an overview as well.
>
> The MPLAB ICD2 can be used with Linux! The original files our code
> heavily bases on use the LPLAB code from
> http://www.landamore.com/pic.html.
>
> Though, the LPLAB code was not working for our PIC18F6720 from
> Microchip, due to problems with parsing the compiled HEX files, the
> communication with the serial port as well as the communication
> protocoll which relied on an old and hard-to-get MPLAB ICD2 firmware.
>
> Our version works with the MPLAB ICD2 firmware supplied with
> Microchip's MPLAB 7.21, but should work with any firmware versions.
> The MPLAB ICD2 is connected to the computer using the serial port, or,
> preferred, the USB port.
>
> Currently, we can
>
> set the configuration bits
> download HEX files generated with the CCSC C compiler and
> program Particles with it
> verifiy the downloaded code
> use USB or serial connection
> The tool currently provides a command line interfaces. We currently
> provide the raw sources which so far have been tested with Debian and
> Gentoo Linux.
>
> If you have questions on the ICD2 programmer code for Linux, please
> contact us at icd2linux @ hcilab.org
>
> --
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>
