gnupic: Re: [gnupic] need pic18fxxx programmer!!
Subject:
Re: [gnupic] need pic18fxxx programmer!!
From:
"George M. Gallant, Jr." ####@####.####
Date:
24 Jan 2006 01:02:41 +0000
Message-Id: <1138064553.4571.50.camel@scuba.home.net>
I used slow bit/banger to build a 628 based serial unit. I then used
that unit
develop a 18f1320 unit. Currently developing at 18f2550 that will also
do jtag.
Not very difficult and the Wisp628 provides a great starting platform,
too bad
the code isn't in C or assembler.
George
On Mon, 2006-01-23 at 11:28 -0800, Jay Dagenais wrote:
> One thing that I am noticing in common with these available programmer
> designs, is that they mostly all centre around the use of a 16series PIC for
> the progeammers firmware, I am wondering is I am able to use any PIC for
> this purpose, does it have to be a 16 series PIC or can I use an 18 series
> with ease? I ask because I only have one type of PIC16 and it isn't any of
> the types I have seen used so far(PIC16F917). Could I use a software based
> programmer to load the firmware into this PIC, and then use the PIC to build
> tha hardware programmer for the 18series? Does this seem like a sensable
> idea here, or is there an easier way for me to go? Again, thanks fo rthe
> help with this!
>
>
> >From: "Jay Dagenais" ####@####.####
> >Reply-To: ####@####.####
> >To: ####@####.####
> >Subject: Re: [gnupic] need pic18fxxx programmer!!
> >Date: Sat, 21 Jan 2006 19:03:25 -0800
> >
> >Thanks, yeah I would like to build a hardware PIC programmer that supports
> >as many PIC's and if possible AVR devices as well. Do you happen to know
> >wha the main differences are regarding the programming of the PIC10F
> >series? What would have to happen to make these types of programmers
> >capable of programming all of the PIC series, from 10 up to 18.(not the new
> >2x series I heard about though as I know nothing of their similarities.) I
> >just briefly have looked at these Pony and broccoli programming software,
> >they do look promising to an extent, I am going to try and build some sort
> >of dongle that can attach to most any device, in circuit or not.
> >
> >
> >>From: Xiaofan Chen ####@####.####
> >>Reply-To: ####@####.####
> >>To: ####@####.####
> >>Subject: Re: [gnupic] need pic18fxxx programmer!!
> >>Date: Sun, 22 Jan 2006 09:30:10 +0800
> >>
> >>On 1/22/06, Jay Dagenais ####@####.#### wrote:
> >> > Hi all, I subscribed a while back and have been just checking out
> >>everyday,
> >> > mostly have been seeking ideas for a good programmer, but none have
> >>really
> >> > come up that I have seen yet, so time to just ask outright- Is there a
> >> > fairly simple design for a programmer (not for 16 series!!!) that
> >>doesn't
> >> > use hard to find parts and is able to program many types of PIC's, say
> >>from
> >> > 10F series up to 18F series.
> >>
> >>If you want to make one by yourself, Wisp628A is a good choice. You
> >>do need to get the 16F628A first. xwisp2 works across OS/2, Windows,
> >>Linux, Mac OS X and FreeBSD. It also supports many PIC16F and 18F
> >>parts. It will not support 10F and other base line PICs though.
> >>
> >>Regards,
> >>Xiaofan
> >>
> >>---------------------------------------------------------------------
> >>To unsubscribe, e-mail: ####@####.####
> >>For additional commands, e-mail: ####@####.####
> >>
> >
> >_________________________________________________________________
> >Take advantage of powerful junk e-mail filters built on patented Microsoft
> >SmartScreen Technology.
> >http://join.msn.com/?pgmarket=en-ca&page=byoa/prem&xAPID=1994&DI=1034&SU=http://hotmail.com/enca&HL=Market_MSNIS_Taglines
> > Start enjoying all the benefits of MSN Premium right now and get the
> >first two months FREE*.
> >
> >
> >---------------------------------------------------------------------
> >To unsubscribe, e-mail: ####@####.####
> >For additional commands, e-mail: ####@####.####
> >
>
> _________________________________________________________________
> MSN Calendar keeps you organized and takes the effort out of scheduling
> get-togethers.
> http://join.msn.com/?pgmarket=en-ca&page=byoa/prem&xAPID=1994&DI=1034&SU=http://hotmail.com/enca&HL=Market_MSNIS_Taglines
> Start enjoying all the benefits of MSN Premium right now and get the
> first two months FREE*.
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: ####@####.####
> For additional commands, e-mail: ####@####.####
>