gnupic: Re: [gnupic] Olimex PG2C programmer
Subject:
Re: [gnupic] Olimex PG2C programmer
From:
"John Chubick" ####@####.####
Date:
1 Apr 2006 03:27:46 +0100
Message-Id: <143d30ad0603311826m728b37d1xcb979a66f052ef1a@mail.gmail.com>
I don't recall doing anything "special". Here are my settings on the
Programmer configuration panel:
Serial /dev/ttyS1
Vpp pin3
Vdd pin5
Clock pin7
Data in pin8
Data out pin4
Data R/W pin5
Clock delay 20
That's it...no inverted options checked, etc... I think these correspond to
selecting JDM Class (delay 20) from the drop down.
Make sure you've selected the proper serial port. Oh, and the other thing I
found I had to do was chmod 777 /dev/ttyS1 as root to give normal users
write privileges to the serial port.
Hope this helps.
John
On 3/31/06, Wayne Topa ####@####.#### wrote:
>
> John ####@####.#### is reported to have said:
> > I've used the PG2C almost exclusively since I started pic programming
> about
> > a year ago. It works very well with the PiKdev programmer but I've never
> > used picprog. Isn't picprog a parallel port programmer?
> >
> John
>
> Did you do anything special to get the PG2C working with pikdev?
>
> I tried all of the JDM options and can't get to to communicate.
>
> Wayne
>
> --
> Windows 3.1 not found: (C)heer, (P)arty, (D)ance?
> _______________________________________________________
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: ####@####.####
> For additional commands, e-mail: ####@####.####
>
>
