gnupic: Re: [gnupic] Olimex PG2C programmer
Subject:
Re: [gnupic] Olimex PG2C programmer
From:
Wayne Topa ####@####.####
Date:
1 Apr 2006 15:49:38 +0100
Message-Id: <20060401052328.GA7813@intergate.com>
John ####@####.#### is reported to have said:
> I don't recall doing anything "special". Here are my settings on the
> Programmer configuration panel:
> Serial /dev/ttyS1
> Vpp pin3
> Vdd pin5
> Clock pin7
> Data in pin8
> Data out pin4
> Data R/W pin5
> Clock delay 20
>
> That's it...no inverted options checked, etc... I think these correspond to
> selecting JDM Class (delay 20) from the drop down.
>
> Make sure you've selected the proper serial port. Oh, and the other thing I
> found I had to do was chmod 777 /dev/ttyS1 as root to give normal users
> write privileges to the serial port.
>
> Hope this helps.
Thanks John, it sure did. I had tried "JDM Class (delay 20)" but had
forgotten to try it as root! I have the group privilege set so was
trying as a user in that group. Just tried as root and all is well.
Many Thanks!
Wayne
--
Every program has two purposes -- one for which it was written and
another for which it wasn't.
_______________________________________________________