gnupic: Re: [gnupic] error building gpsim extra graphic_lcd module
Subject:
Re: [gnupic] error building gpsim extra graphic_lcd module
From:
"Xiaofan Chen" ####@####.####
Date:
25 May 2006 23:44:44 +0100
Message-Id: <a276da400605251544pc9eb43cs74db471dae166eea@mail.gmail.com>
On 5/25/06, Scott Dattalo ####@####.#### wrote:
> On Thu, 2006-05-25 at 20:00 +0800, Xiaofan Chen wrote:
>
> >I tried "gpsim -c glcd_test.cod" and there is no graphic LCD windows.
>
> What happens when you try
>
> gpsim -s glcd_test.cod
>
The first time I saw a splash screen with graphic LCD and then gpsim
caused a segmentation fault.
mcuee@ubuntu:~/Desktop/build/gpsim/gpsim/extras/graphic_lcd/examples$
gpsim -s g lcd_test.cod
gpsim - the GNUPIC simulator
version: Release 0.21.12-pre
type help for help
**gpsim>
(gpsim:8633): Gdk-WARNING **: locale not supported by Xlib
(gpsim:8633): Gdk-WARNING **: cannot set locale modifiers
SimulationMode:52
Warning SSP Module is not implemented
FIXME: 16bit processor is assuming that PLL is on - should check config bits
Widths 36 0 36 0
FIXME: HLL files are not supported at the moment
SSPCON1 is not implemented
SSPCON2 is not implemented
SSPSTAT is not implemented
SSPADD is not implemented
Program_Counter16::put_value 0x0
Enabling WDT timeout = 0.018 seconds
Widths 36 0 0 0
module_x 0, module widget size 316, 127
pullup resistor or generic voltage source
Attributes:
.resistance - pullup resistance
.voltage - pullup or drive voltage
.capacitance - pin capacitance
Widths 36 0 0 0
pullup resistor or generic voltage source
Attributes:
.resistance - pullup resistance
.voltage - pullup or drive voltage
.capacitance - pin capacitance
Widths 36 0 0 0
0: p18f452 Execution at done(0x298)
Message:*** PASSED LCD test
1: p18f452 Execution at 0x29c
Message:*** FAILED LCD test
**gpsim> Segmentation fault
After that I can did not see the LCD and gpsim segfaults if I want to
load the breadboard.
I will do a fresh checkout of the svn source and then build gpsim
and the module from scratch later.
Regards,
Xiaofan