gnupic: Re: [gnupic] error building gpsim extra graphic_lcd module
Subject:
Re: [gnupic] error building gpsim extra graphic_lcd module
From:
"Xiaofan Chen" ####@####.####
Date:
2 Jun 2006 14:06:36 +0100
Message-Id: <a276da400606020606j2dd666c2q299581556dd6052@mail.gmail.com>
On 5/31/06, Scott Dattalo ####@####.#### wrote:
> Hi Xiaofan,
>
> The good news (or bad news depending on your perspective), is that I can
> still duplicate the segv on my other system (my non-development system).
> I'll take a look at the problem on this system.
>
The same problem happens under FC5.
[mcuee@localhost examples]$ uname -a
Linux localhost.localdomain 2.6.15-1.2054_FC5 #1 Tue Mar 14 15:48:33
EST 2006 i686 athlon i386 GNU/Linux
[mcuee@localhost examples]$ gpsim -s glcd_test.cod
gpsim - the GNUPIC simulator
version: Release 0.21.12-pre
type help for help
**gpsim> SimulationMode:52
Warning SSP Module is not implemented
FIXME: 16bit processor is assuming that PLL is on - should check config bits
Setting config word 0x300000 = 0xdeff
Setting config word 0x300002 = 0xffff
Setting config word 0x300004 = 0xfffb
Setting config word 0x300006 = 0xfffb
Setting config word 0x300008 = 0xbffc
Setting config word 0x30000a = 0xffff
Setting config word 0x30000c = 0xffff
FIXME: HLL files are not supported at the moment
SSPCON1 is not implemented
SSPCON2 is not implemented
SSPSTAT is not implemented
SSPADD is not implemented
Program_Counter16::put_value 0x0
pullup resistor or generic voltage source
Attributes:
.resistance - pullup resistance
.voltage - pullup or drive voltage
.capacitance - pin capacitance
pullup resistor or generic voltage source
Attributes:
.resistance - pullup resistance
.voltage - pullup or drive voltage
.capacitance - pin capacitance
0: p18f452 Execution at done(0x298)
Message:*** PASSED LCD test
1: p18f452 Execution at 0x29c
Message:*** FAILED LCD test
**gpsim> Widths 36 0 0 0
module_x 0, module widget size 316, 127
Widths 36 0 0 0
Widths 36 0 0 0
Widths 36 0 36 0
LCD update
Segmentation fault
Regards,
Xiaofan
