gnupic: Re: [gnupic] About a USB programmer I found
Subject:
Re: [gnupic] About a USB programmer I found
From:
####@####.####
Date:
21 Aug 2006 21:46:06 +0100
Message-Id: <fa10acd23e55.44ea28ba@canarias.org>
----- Original Message -----
From: ####@####.####
Date: Monday, August 21, 2006 9:35 pm
Subject: Re: [gnupic] About a USB programmer I found
To: ####@####.####
> > In fact it is quite easy and unexpensive to build your own one
> (30€
> > ?),at least for a parallel port programmer. See
> > http://gforge.enseeiht.fr/docman/view.php/10/203/vascoprog-
> > 20060108.zipand
> > http://gforge.enseeiht.fr/docman/view.php/10/220/low-img_1347.jpg.
> > This is the programmer I am actually using.
>
> And then, once I have all that circuit done how should I proceed?
>
> I used to have linux on my sister's computer before buying this
> laptop. It wouldn't be so difficult either to
> make a live-cdrom with the needed software, or to install mplab or
> whatever if I can make a programmer the way you point out. I also
> see in the photo you used a 4550, which is the same one I have.
>
> Best regards,
>
>
>
> --------------------------------------------------------------------
> -
> To unsubscribe, e-mail: ####@####.####
> For additional commands, e-mail: ####@####.####
>
>
Sorry I see now I should use odyssey to make this (if I'm understanding it right).
So the next I'll do is to print out your schematic and translate the other pdf to see if I can put all the component's values on it by my own, to then go and buy those components that I haven't.
Thanks so much (and sorry).
