gnupic: Re: [gnupic] in-circuit debugger
Subject:
Re: [gnupic] in-circuit debugger
From:
"Maxim Wexler" ####@####.####
Date:
4 Feb 2007 23:01:49 +0000
Message-Id: <a0811460702041501saaf1538s744ac3a2efee4042@mail.gmail.com>
elec101: ballast those LEDs! cathodes point to gnd!
On 2/4/07, Robert Pearce ####@####.#### wrote:
>
> On Sun, 4 Feb 2007 14:32:47 -0700
> "Maxim Wexler" ####@####.#### wrote:
>
> >
> > Circ: leds on RB0-2, one debounced-by-hardware pb switch(NO).
>
> Any resistors on any of those? LEDs the right way round?
>
> Given that the code is "established" and it works in simulation, I'd
> suspect you may have overlooked some subtelty of the hardware.
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: ####@####.####
> For additional commands, e-mail: ####@####.####
>
>