gnupic: Troubles with PCON


Previous by date: 21 Jul 2001 23:01:18 -0000 Re: Troubles with PCON, Scott Dattalo
Next by date: 21 Jul 2001 23:01:18 -0000 gpsim-0.20.9b, Scott Dattalo
Previous in thread: 21 Jul 2001 23:01:18 -0000 Re: Troubles with PCON, Scott Dattalo
Next in thread:

Subject: RE: Troubles with PCON
From: "Nestor A. Marchesini" ####@####.####
Date: 21 Jul 2001 23:01:18 -0000
Message-Id: <006b01c11238$8644aa00$ccff2dc8@Marchesini>

Scott

----- Original Message -----
From: Scott Dattalo ####@####.####
To: Nestor A. Marchesini ####@####.####
Cc: ####@####.####
Sent: Saturday, July 21, 2001 12:43 PM
Subject: Re: Troubles with PCON


>
>
> On Sat, 21 Jul 2001, Nestor A. Marchesini wrote:
>
> > me code:
> > ;
> > Start
> > ;
> > ;/* Check reset POR = 0 */
> > ;
> >       bsf     STATUS,RP0             ;Bank 1
> >       bcf     STATUS,RP1             ;
> >       btfss   PCON,NOT_POR     ;? Power = On ?
> >       goto    PowerOn                    ;Not
> > ;
> > ;/* Check if ocurrió a reset by drop of tension BOR = 0 */
> > ;
> >       btfss   PCON,NOT_BOR     ;¿ Drop tension in the +5 Volts ?
> >       goto    PowerOn                    ;Yes
> >
> > the error displayed by gpsim in the terminal
> >
> > 16F877   0x0496  0x1683    bsf   status,5
> >     read: 0x7c from status
> >   wrote: 0x3c to status
> >    cycle: 0x026
> > 16F877   0x0497  0x1303    bcf   status,6
> >     read: 0x7c from status
> >   wrote: 0x3c to status
> >    cycle: 0x027
> > attempt read from invalid file register
> > 16F877   0x0498 0x1C8E    btfss   TMR1L,1
> >     read: 0x00 from indf
> >    cycle: 0x028
> >
> > I try to install gpsim 0.20.9 in .tar.gz and get errors.
> > Is support the register PCON by gpsim 0.20.1 ?
>
> First, the PCON register is not supported in gpsim. The good news is I
> just added it and will try to get a 0.20.10 out within 24hrs with the
> change. gpsim doesn't fully simulate the reset conditions, so the POR
> and BOR bits will essentially be general purpose bits. (Upon startup,
> both bits will be cleared. After a reset, they'll also [improperly] be
> cleared).

This is great !!! such only say and you make the changes,  I hope some day
learn more of C, C++, and can adding me contribution to Gnupic.

> I'm going to try to get an RPM built to simplify the install problems
> everyone is having with gpsim.

In me opinion this is a shape easy of install and uninstall, to install news
versions.

> Scott

thanks again

:)

Nestor A. Marchesini
Chajari-Entre Rios-Argentina
ICQ # 50983752 nick colo
####@####.####



Previous by date: 21 Jul 2001 23:01:18 -0000 Re: Troubles with PCON, Scott Dattalo
Next by date: 21 Jul 2001 23:01:18 -0000 gpsim-0.20.9b, Scott Dattalo
Previous in thread: 21 Jul 2001 23:01:18 -0000 Re: Troubles with PCON, Scott Dattalo
Next in thread:


Powered by ezmlm-browse 0.20.