gnupic: Re: [gnupic] PICDEM FS USB and Linux tools
Subject:
Re: [gnupic] PICDEM FS USB and Linux tools
From:
"Xiaofan Chen" ####@####.####
Date:
22 Sep 2007 02:36:29 +0100
Message-Id: <a276da400709211835l6baad8b2na275bf526a28ee25@mail.gmail.com>
On 9/21/07, Nicolas ####@####.#### wrote:
> On 9/20/07, Rick Bronson ####@####.#### wrote:
> > If someone wanted to use Linux tools for uploading a program via USB
> > to the PICDEM board what are the suggested tools? Two I've run across
>
> Piklab should also support the PICDEM bootloader...
> Please give me feedback if it does not work.
>
I tried the released version 0.14.5 and it does not crash like the
SVN version but it still does not work.
Message:
"
disconnect hardware
connect hardware
disconnect hardware
Connecting Picdem Bootloader on USB Port with device 18F4550...
USB Port: find if there is already an installed driver
USB Port: alternate setting is 0
USB Port: USB bcdDevice: 0x0000
USB Port: send: "\00\00\00\00\00"
USB Port: write to endpoint 0x01 (bulk - out) 5 chars: "\00\00\00\00\00"
USB Port: read from endpoint 0x81 (bulk - in) 4 chars
USB Port: received: "\00\00\00\01"
Bootloader version 1.0.0 detected
Set target self powered: true
Connected.
disconnect hardware
The selected programmer cannot read device memory."
Xiaofan
