plustek: Device or resource busy
Subject:
Re: Device or resource busy
From:
"Jaeger, Gerhard" ####@####.####
Date:
16 Aug 2000 06:46:31 -0000
Message-Id: <00081608480302.00327@dagobert>
On Fre, 11 Aug 2000, you wrote:
[snip]
>
> > One question: Is the scanner an OP9636P Turbo?
>
> Not that I know of. It's a used one, so I'm not perfectly sure, but it
> doesn't say Turbo anywhere on it. The scan speed (in Windows) doesn't
> imply it's a Turbo either... :-)
>
Hi Michael,
Turbo does not mean, that the scanner is faster ;-)
There are currently three OpticPro9636P Scanners.
OP9636P
OP9636P+
OP9636PTurbo
The + and the Turbo models are quite the same and
the difference between the Turbo and the non-Turbo
is the scan-sensor. The Turbo uses the same like
the newer OP9636T/12000T while the non-Turbo
uses the older ones from the OP9630....
But this should have no effect on the other stuff. There's
one thing you can do. Comment out two lines in the
memory test in file src/p9636.c in function p9636ReadWriteTest
a line 407/408 or so:
retval = _E_NO_DEV;
break.
Simply put // before these lines and recompile and reinstall
the driver.
After loading, please check the debug output for other
"Error in memory test..." messages.
After this patch you're might able to scan, but it is not
guaranteed that this will work.
I think this error is a problem in communication with
the scanner...
Have you tested with Windows on the same machine?
Let me know what happend
Gerhard
