plustek: Test Version 0.42-0 (Parallelport and USB) - Part 2
Subject:
Re: Test Version 0.42-0 (Parallelport and USB) - Part 2
From:
Gene Heskett ####@####.####
Date:
19 Feb 2002 05:32:12 -0000
Message-Id: <20020219052725037.AAA709@mail.iolinc.net@there>
On Monday 18 February 2002 01:35 pm, Jaeger, Gerhard wrote:
>On Monday, 18. February 2002 05:23, Gene Heskett wrote:
>[SNIP]
>
>> Going back to look at the preview, its trashed, totally. All
>> gains are now set for maximum except luminance gamma, and
>> there is a faintly reddish image is all I see. The lamp was
>> on when the scan was made. The histogram displays aren't
>> blank, but close, only a bit on the left edges of the
>> displays.
>
>Oops! Might be a problem with the gamma tables!
>Do you use xscanimage?
No, I was using the xsane front end.
>Can you send me the debug output (you know export
> SANE_DEBUG_PLUSTEK=12)?
>
I'll do that, but probably not till much later in the week, today
was the wifes birthday, and we have company coming tommorrow for
at least a couple of days, so its possible my 'putin' time will
be limited.
>> Then I tried a 100 dpi scan, with a full page set, a 100 dpi
>> scan gets me a black viewer page, with a small bit of red
>> extending up from the black ends of the histograms, but not
>> enough to see it in the viewer. I auto-adjust it, and a
>> rescan now shows me a 99% black page in the viewer with a
>> small amount of red detail from the image, rather like its
>> bleeding through from black. No real change from the preview.
>>
>> I also have a lamp off in 1 minute set, so I'll wait for that.
>> It didn't, and it still left the lamp on when xsane was quit.
>
>Only works during xsane is up and running, as the timer is
>implemented in the library and not as daemon...
I'd left it (xsane) running for about 30 minutes, and it didn't
shut off...
>> To recap, the lamp warmup now works, the image isn't, and the
>> lamp is left on at quitting time. A re-run shuts it off. Is
>> that option supposed to be a 1, or a 'yes' ?
>
>It's a 1. Re-run shutoff is because of the chip reset...
I have a '1' in there, so it should be right.
>> I'll see what the diffs are, but thats tommorrow night, its
>> been a long weekend of wee hours work at the transmitter & the
>> old mans about worn out.
>
>No hurry! For the Plustek devices it works, I've tested again...
> Gerhard
Its Good(TM) that it works for one device. :-)
--
Cheers, Gene
AMD K6-III@500mhz 320M
Athlon1600XP@1400mhz 512M
98.5+% setiathome rank, not too shabby for a hillbilly