plustek: primax and plustek-module-42-5
Subject:
primax and plustek-module-42-5
From:
"a.brotzmann" ####@####.####
Date:
14 Mar 2002 17:27:35 -0000
Message-Id: <3C8E26EE0001DBE7@raven.intern.zoo.tiscali.de> (added by postmaster@webmail.tiscali.de)
Hi,
I downloaded, compiled and installed the plustek-kernelmodule for my "Primax
4800 Direct" and everything went fine so far. But now I have problems to get
it loaded:
/sbin/modprobe pt_drv || exit 1
/lib/modules/2.4.3-20mdk/misc/pt_drv.o: init_module: Success
Hint: insmod errors can be caused by incorrect module parameters, including
invalid IO or IRQ parameters
/lib/modules/2.4.3-20mdk/misc/pt_drv.o: insmod
/lib/modules/2.4.3-20mdk/misc/pt_drv.o failed
/lib/modules/2.4.3-20mdk/misc/pt_drv.o: insmod pt_drv failed
make: *** [load] Fehler 1
and dmesg says:
pt_drv: init_module()
pt_drv : driver version 0.42-6
ProcFsInitialize()
ptdrvInit(0)
Init settings done
ScanData = 0xc05e8000
Using fast I/O
Requested port at 0x378
Requested port (0x378) found
Port mode reported: (0x005b)
Port for device 0 registered
ptdrvOpen(port=0x378)
Try to claim the parport
parport-modi: SPP PS/2 ECP PS/2(ECP)
Using SPP-mode
Trying faster mode...
Attempting to set PS2 from ECPPS2 mode.
Port is set to (ECP) PS2 bidirectional mode.
Starting Scanner-Autodetection
************ DETECTP48xx ************
ModelSet4800()
modelInitPageSettings()
A4 set
ModelSet4800() done.
P48xxInitAsic()
DacInitialize()
ImageInitialize()
IOFuncInitialize()
IOInitialize()
MotorInitialize()
Dataport = 0x0378
Ctrlport = 0x037a
Test 0x55
Test 0xAA
Compare data=0x78 and status=0x8, port=0x378
p48xxReadWriteTest()
Found a 96001 ASIC at Reg 0x13
ModelSet4800()
modelInitPageSettings()
A4 set
ModelSet4800() done.
p48xxCheck4800Memory()
Error in memory test at pos 256 (0 != 255)
p48xxReadWriteTest()
Found a 96001 ASIC at Reg 0x13
ModelSet4800()
modelInitPageSettings()
A4 set
ModelSet4800() done.
p48xxCheck4800Memory()
Error in memory test at pos 256 (0 != 255)
p48xxReadWriteTest()
Found a 96001 ASIC at Reg 0x13
ModelSet4800()
modelInitPageSettings()
A4 set
ModelSet4800() done.
p48xxCheck4800Memory()
Error in memory test at pos 256 (0 != 255)
p48xxReadWriteTest()
Found a 96001 ASIC at Reg 0x13
ModelSet4800()
modelInitPageSettings()
A4 set
ModelSet4800() done.
p48xxCheck4800Memory()
Error in memory test at pos 256 (0 != 255)
p48xxReadWriteTest()
Found a 96001 ASIC at Reg 0x13
ModelSet4800()
modelInitPageSettings()
A4 set
ModelSet4800() done.
p48xxCheck4800Memory()
Error in memory test at pos 256 (0 != 255)
detectScannerConnection() returns -9020.
************* ASIC9800x *************
IOInitialize()
ASIC = 0xF0
Unknown ASIC-ID
*** DETECTION DONE, result: -9020 ***
ptdrvClose()
MiscRestorePort()
Releasing parport
ptdrvShutdown()
cleanup device 0
Port unregistered
ProcFsShutdown()
pt_drv: proc del 'info' root='pt_drv'
pt_drv: proc del 'pt_drv' root='/proc'
pt_drv : no device(s) detected, (-9020)
--------------------------------------------
I tryed the mov-switch and some other things to - without success. If I had
any information about the protocol i would fix this problem by myself. Please
help me either by giving me the nessesary information or fix it self. My
scanner is the only thing that saves my Win-partition from being deleted.
CU
Andreas Brotzmann
<http://www.andreas-brotzmann.de>
####@####.####
