plustek: scanner genius ColorPage Vivid Pro II
Subject:
Re: scanner genius ColorPage Vivid Pro II
From:
Edson Angelo Carara ####@####.####
Date:
26 Mar 2002 12:10:45 -0000
Message-Id: <200203261306.KAA22532@fabrima.com.br>
Hi,
Thansk your reply.
I followed its suggestion but without success. Scanner works with mode EPP,
then I used forcemode=2, and 1 (SPP) too, and also I used mov of 0 the 6.
The BIOS already was setted for mode EPP.
It's my modules.conf
pre-install pcmcia_core CARDMGR_OPTS=-f /etc/rc.d/init.d/pcmcia start
alias sound-slot-0 cmpci
alias eth0 3c509
alias net-pf-4 ipx
alias usb-interface usb-ohci
#alias char-major-40 pt_drv
#pre-install pt_drv modprobe -k parport
#options pt_drv lampoff=180 warmup=15 port=0x378 lOffonEnd=0 mov=0 slowIO=1
#alias char-major-40 pt_drv
#post-install pt_drv modprobe -k parport
#pre-install pt_drv modprobe -k parport
#options pt_drv lampoff=180 warmup=15 lOffonEnd=0 port=0x378
alias char-major-40 pt_drv
pre-install pt_drv modprobe -k parport
options pt_drv lampoff=180 warmup=15 port=0x378 lOffonEnd=0 mov=0 slowIO=0
forceMode=2
This is the output of lsmod :
[root@informatica01 plustek_driver]# lsmod
Module Size Used by
smbfs 35120 1 (autoclean)
parport_pc 13072 0 (autoclean)
parport 15296 0 [parport_pc]
cmpci 32112 0
soundcore 4528 4 [cmpci]
af_packet 14080 0 (autoclean)
usb-ohci 20144 0 (unused)
usbcore 58208 1 [usb-ohci]
3c509 8272 1 (autoclean)
nls_iso8859-1 2832 3 (autoclean)
nls_cp850 3584 3 (autoclean)
vfat 9968 2 (autoclean)
fat 32864 0 (autoclean) [vfat]
rtc 6752 0 (autoclean)
It follows log generated by debug
Mar 26 08:12:22 informatica01 kernel:
---------------------------------------------
Mar 26 08:20:26 informatica01 kernel:
*********************************************
Mar 26 08:20:26 informatica01 kernel: pt_drv: init_module()
Mar 26 08:20:26 informatica01 kernel: devfs_mk_dir(scanner): using old entry
in dir: c11fd5c0 ""
Mar 26 08:20:26 informatica01 kernel: pt_drv : driver version 0.42-6
Mar 26 08:20:26 informatica01 kernel: ProcFsInitialize()
Mar 26 08:20:26 informatica01 kernel: ptdrvInit(0)
Mar 26 08:20:26 informatica01 kernel: Init settings done
Mar 26 08:20:26 informatica01 kernel: ScanData = 0xc5778000
Mar 26 08:20:26 informatica01 kernel: Using fast I/O
Mar 26 08:20:26 informatica01 kernel: Requested port at 0x378
Mar 26 08:20:26 informatica01 kernel: Requested port (0x378) found
Mar 26 08:20:26 informatica01 kernel: Port mode reported: (0x0041)
Mar 26 08:20:26 informatica01 kernel: Port for device 0 registered
Mar 26 08:20:26 informatica01 kernel: ptdrvOpen(port=0x378)
Mar 26 08:20:26 informatica01 kernel: Try to claim the parport
Mar 26 08:20:26 informatica01 kernel: parport-modi: SPP
Mar 26 08:20:26 informatica01 kernel: Use of EPP-mode enforced
Mar 26 08:20:26 informatica01 kernel: Starting Scanner-Autodetection
Mar 26 08:20:26 informatica01 kernel: ************ DETECTP48xx ************
Mar 26 08:20:26 informatica01 kernel: ModelSet4800()
Mar 26 08:20:26 informatica01 kernel: modelInitPageSettings()
Mar 26 08:20:26 informatica01 kernel: A4 set
Mar 26 08:20:26 informatica01 kernel: ModelSet4800() done.
Mar 26 08:20:26 informatica01 kernel: P48xxInitAsic()
Mar 26 08:20:26 informatica01 kernel: DacInitialize()
Mar 26 08:20:26 informatica01 kernel: ImageInitialize()
Mar 26 08:20:26 informatica01 kernel: IOFuncInitialize()
Mar 26 08:20:26 informatica01 kernel: IOInitialize()
Mar 26 08:20:26 informatica01 kernel: MotorInitialize()
Mar 26 08:20:26 informatica01 kernel: Dataport = 0x0378
Mar 26 08:20:26 informatica01 kernel: Ctrlport = 0x037a
Mar 26 08:20:26 informatica01 kernel: Test 0x55
Mar 26 08:20:26 informatica01 kernel: Test 0xAA
Mar 26 08:20:26 informatica01 kernel: Compare data=0x7e and status=0x7e,
port=0x378
Mar 26 08:20:26 informatica01 kernel: detectScannerConnection() returns -9021.
Mar 26 08:20:26 informatica01 kernel: ************* ASIC9800x *************
Mar 26 08:20:26 informatica01 kernel: IOInitialize()
Mar 26 08:20:26 informatica01 kernel: ASIC = 0x77
Mar 26 08:20:26 informatica01 kernel: Unknown ASIC-ID
Mar 26 08:20:26 informatica01 kernel: *** DETECTION DONE, result: -9020 ***
Mar 26 08:20:26 informatica01 kernel: ptdrvClose()
Mar 26 08:20:26 informatica01 kernel: MiscRestorePort()
Mar 26 08:20:26 informatica01 kernel: - no need to restore portmode !
Mar 26 08:20:26 informatica01 kernel: Releasing parport
Mar 26 08:20:26 informatica01 kernel: ptdrvShutdown()
Mar 26 08:20:26 informatica01 kernel: cleanup device 0
Mar 26 08:20:26 informatica01 kernel: Port unregistered
Mar 26 08:20:26 informatica01 kernel: ProcFsShutdown()
Mar 26 08:20:26 informatica01 kernel: pt_drv: proc del 'info' root='pt_drv'
Mar 26 08:20:26 informatica01 kernel: pt_drv: proc del 'pt_drv' root='/proc'
Mar 26 08:20:26 informatica01 kernel: pt_drv : no device(s) detected, (-9020)
Mar 26 08:20:26 informatica01 kernel:
---------------------------------------------
Thanks,
Em Terça 26 Março 2002 04:49, you wrote:
> Hi,
>
> it seems that there's also a communication problem between
> the driver an the scanner...
> Enable the debug messages for the driver:
> cd [your-directory]/plustek_driver
> make clean
> make all DEBUG=y
> then as root:
> make install
> make load
>
> Then send this output to the list again.
>
> You might play around with various parallel-port modes
> (in the BIOS) and or try and use the forceMode switch
> (see man page for this one)
>
> Gerhard
>
> On Montag, 25. März 2002 17:36, Edson Angelo Carara wrote:
> > Hi,
> >
> > I'am trying to install drive plustek for scanner genius ColorPage Vivid
> > Pro II. According to FCC the manufacture is primax and as homepage of
> > Sane the driver is plustek.
> > I followed steps this homepage and tips too, but not OK.
> > When I type "make load" the following message of error is show:
> >
> > /sbin/modprobe pt_drv || exit 1
> > /lib/modules/2.4.18/misc/pt_drv.o: init_module: Success
> > Hint: insmod errors can be caused by incorrect module parameters,
> > including invalid IO or IRQ parameters
> > /lib/modules/2.4.18/misc/pt_drv.o: insmod
> > /lib/modules/2.4.18/misc/pt_drv.o failed
> > /lib/modules/2.4.18/misc/pt_drv.o: insmod pt_drv failed
> > make: ** [load] Erro 1
> >
> > and the following lines are added in log
> >
> > Mar 25 12:16:18 informatica01 kernel: devfs_mk_dir(scanner): using old
> > entry in dir: c11fd5c0 ""
> > Mar 25 12:16:18 informatica01 kernel: pt_drv : driver version 0.42-6
> > Mar 25 12:16:18 informatica01 kernel: parport0: PC-style at 0x378
> > [PCSPP(,...)]
> > Mar 25 12:16:18 informatica01 kernel: pt_drv : no device(s) detected,
> > (-9020)
> >
> > I'am using sane 1.0.7 and kernel 2.4.8 compiled without support IEEE
> > 1284, mandrake linux 8.1 and plustek driver 0.42.
> >
> > Please, Any help will be very important I to give plus this pacing in the
> > platform linux
> >
> > Thanks
--
Edson Angelo Carara
Analista de Sistemas
####@####.####
Fabrima Máquinas Automáticas Ltda.
www.fabrima.com.br