plustek: Plustek OpticPro U-12 new/different/not recognized..
Subject:
Re: Plustek OpticPro U-12 new/different/not recognized..
From:
"Jaeger, Gerhard" ####@####.####
Date:
14 Apr 2002 22:17:19 -0000
Message-Id: <16ws0l-11SAiWC@fmrl00.sul.t-online.com>
Hi Vikki,
the problem is, that the Plustek USB device with the
product ID 0x0001 do not contain a LM983x chip inside.
AFAIK, the use a GrandTech chip, which is not supported
by the Plustek backend -sorry!
Maybe the site:
http://www.mivlgu.murom.ru/~vsu/gt68xx/
can help you...
Gerhard
On Saturday, 13. April 2002 09:42, Victoria Welch wrote:
> Hello,
>
> Running usbview shows the scanner and cat of /proc/bus/usb/devices contains
> the same info:
>
> [ ... ]
> P: Vendor=07b3 ProdID=0001 Rev= 0.00
> S: Product=USB Scanner
> C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 48mA
> I: If#= 0 Alt= 0 #EPs= 2 Cls=10(unk. ) Sub=01 Prot=00 Driver=(none)
> E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
> T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=1.5 MxCh= 0
> D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> [ ... ]
>
> The scanner cover is marked "Plustek OpticPro U12" and it does function
> under windoz.
>
> I still haven't gotten xsane to recognize it and am continuing to stagger
> through getting it going but I thought this information might be useful /
> helpful.
>
> Thanks very much for your efforts. If there is anything further I can tell
> you in /about this matter please feel free to ask!
>
> In case it helps, this is a fresh Mandrake 8.2 installation on an AMD
> Thunderbird 850 MHz with 640 Meg of ram and an nvidia TNT2 M64 video.
>
> Take care, Vikki
