plustek: pt_drv not detecting OP9630P
Subject:
pt_drv not detecting OP9630P
From:
Alexander Gran ####@####.####
Date:
28 Apr 2002 17:38:45 -0000
Message-Id: <200204281936.23500@zodiac.zodiac.dnsalias.org>
Hi List!
I have a Plustek Optic Pro 9630P. I've just downloaded sane-1.0.6 source and
plustek-sane_042-9. The package compiled ok, although the kernel-module
produced several warnings about a deprecreated include file (malloc.h vs.
slab.h (Kernel 2.4.16), I suppose this is known. System is SuSE 7.3
But when I try to load the module, it doesn't detect the scanner. Heres the
debug-output:
Apr 28 19:23:29 zodiac kernel: *********************************************
Apr 28 19:23:29 zodiac kernel: pt_drv: init_module()
Apr 28 19:23:29 zodiac kernel: pt_drv : driver version 0.42-10
Apr 28 19:23:29 zodiac kernel: ProcFsInitialize()
Apr 28 19:23:29 zodiac kernel: ptdrvInit(0)
Apr 28 19:23:29 zodiac kernel: Init settings done
Apr 28 19:23:29 zodiac kernel: ScanData = 0xcd2a4000
Apr 28 19:23:29 zodiac kernel: Using fast I/O
Apr 28 19:23:29 zodiac kernel: Requested port at 0x378
Apr 28 19:23:29 zodiac kernel: Requested port (0x378) found
Apr 28 19:23:29 zodiac kernel: Port mode reported: (0x0047)
Apr 28 19:23:29 zodiac kernel: Port for device 0 registered
Apr 28 19:23:29 zodiac kernel: ptdrvOpen(port=0x378)
Apr 28 19:23:29 zodiac kernel: Try to claim the parport
Apr 28 19:23:29 zodiac kernel: parport-modi: SPP PS/2 EPP EPP(ECP) PS/2(ECP)
Apr 28 19:23:29 zodiac kernel: Using EPP-mode
Apr 28 19:23:29 zodiac kernel: Starting Scanner-Autodetection
Apr 28 19:23:29 zodiac kernel: ************ DETECTP48xx ************
Apr 28 19:23:29 zodiac kernel: ModelSet4800()
Apr 28 19:23:29 zodiac kernel: modelInitPageSettings()
Apr 28 19:23:29 zodiac kernel: A4 set
Apr 28 19:23:29 zodiac kernel: ModelSet4800() done.
Apr 28 19:23:29 zodiac kernel: P48xxInitAsic()
Apr 28 19:23:29 zodiac kernel: DacInitialize()
Apr 28 19:23:29 zodiac kernel: ImageInitialize()
Apr 28 19:23:29 zodiac kernel: IOFuncInitialize()
Apr 28 19:23:29 zodiac kernel: IOInitialize()
Apr 28 19:23:29 zodiac kernel: MotorInitialize()
Apr 28 19:23:29 zodiac kernel: Dataport = 0x0378
Apr 28 19:23:29 zodiac kernel: Ctrlport = 0x037a
Apr 28 19:23:29 zodiac kernel: Test 0x55
Apr 28 19:23:29 zodiac kernel: Test 0xAA
Apr 28 19:23:29 zodiac kernel: Compare data=0x78 and status=0x78, port=0x378
Apr 28 19:23:29 zodiac kernel: detectScannerConnection() returns -9021.
Apr 28 19:23:29 zodiac kernel: ************* ASIC9800x *************
Apr 28 19:23:29 zodiac kernel: IOInitialize()
Apr 28 19:23:29 zodiac kernel: ASIC = 0x77
Apr 28 19:23:29 zodiac kernel: Unknown ASIC-ID
Apr 28 19:23:29 zodiac kernel: *** DETECTION DONE, result: -9020 ***
Apr 28 19:23:29 zodiac kernel: ptdrvClose()
Apr 28 19:23:29 zodiac kernel: MiscRestorePort()
Apr 28 19:23:29 zodiac kernel: - no need to restore portmode !
Apr 28 19:23:29 zodiac kernel: Releasing parport
Apr 28 19:23:29 zodiac kernel: ptdrvShutdown()
Apr 28 19:23:29 zodiac kernel: cleanup device 0
Apr 28 19:23:29 zodiac kernel: Port unregistered
Apr 28 19:23:29 zodiac kernel: ProcFsShutdown()
Apr 28 19:23:29 zodiac kernel: pt_drv: proc del 'info' root='pt_drv'
Apr 28 19:23:29 zodiac kernel: pt_drv: proc del 'pt_drv' root='/proc'
Apr 28 19:23:29 zodiac kernel: pt_drv : no device(s) detected, (-9020)
Apr 28 19:23:29 zodiac kernel: ---------------------------------------------
modules.conf looks like follows:
alias char-major-40 pt_drv
options pt_drv lampoff=180 warmup=15
In the kernel-Configuration Config_parport;
Config_parport_pc;Config_parport_1284 are set to yes.
dmesg knows about my Port:
parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP]
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport_pc: Via 686A parallel port: io=0x378
It would be nice if someone could help me!
regards
Alex
