plustek: OpticPro96000P - Installation problem
Subject:
Re: OpticPro96000P - Installation problem
From:
####@####.#### (Burkhard Kayser)
Date:
11 May 2002 17:58:37 -0000
Message-Id: <200205111926.37370.burkhard.kayser@t-online.de>
On Friday 10 May 2002 22:32, Burkhard Kayser wrote:
> I've just upgraded my system from SuSE7.3 to 8.0. My scanner worked very
> well with 7.3 and the driver version 0.42.7. After the upgrade I recompiled
> the whole sane package and the plustek module. But unfortunately make load
> fails.
>
> caroline:/software/xsane/sane-backends-1.0.7/backend/plustek_driver # make
> load
> /sbin/modprobe pt_drv || exit 1
> /lib/modules/2.4.18-4GB/misc/pt_drv.o: init_module: Success
> Hint: insmod errors can be caused by incorrect module parameters, including
> invalid IO or IRQ parameters
> /lib/modules/2.4.18-4GB/misc/pt_drv.o: insmod
> /lib/modules/2.4.18-4GB/misc/pt_drv.o failed
> /lib/modules/2.4.18-4GB/misc/pt_drv.o: insmod pt_drv failed
> make: *** [load] Error 1
> caroline:/software/xsane/sane-backends-1.0.7/backend/plustek_driver #
>
> dmesg shows:
> pt_drv : driver version 0.42-7
> pt_drv : no device(s) detected, (-9020)
>
> I've added
>
> alias char-major-40 pt_drv
> pre-install pt_drv /sbin/modprobe "-k" "parport"
> options pt_drv lampoff=180 warmup=15 port=0x378 mov=0 slowIO=0 mov=0
> forceMode=0 lOffonEnd=1
>
> to modules.conf.
>
> Can anybody help me ?
>
> Thanks a lot.
> Burkhard Kayser
In addition to my first mail I'm sending the output of dmesg after compiling
the driver with debug enabled.
*********************************************
pt_drv: init_module()
pt_drv : driver version 0.42-10
ProcFsInitialize()
ptdrvInit(0)
Init settings done
ScanData = 0xc32f0000
Using fast I/O
Requested port at 0x378
Requested port (0x378) found
Port mode reported: (0x0047)
Port for device 0 registered
ptdrvOpen(port=0x378)
Try to claim the parport
parport-modi: SPP PS/2 EPP EPP(ECP) PS/2(ECP)
Using EPP-mode
Starting Scanner-Autodetection
************ DETECTP48xx ************
ModelSet4800()
modelInitPageSettings()
A4 set
ModelSet4800() done.
P48xxInitAsic()
DacInitialize()
ImageInitialize()
IOFuncInitialize()
IOInitialize()
MotorInitialize()
Dataport = 0x0378
Ctrlport = 0x037a
Test 0x55
Test 0xAA
Compare data=0x87 and status=0x7, port=0x378
p48xxReadWriteTest()
Found a 96003 ASIC at Reg 0x13
ModelSet4830()
modelInitPageSettings()
A4 set
ModelSet4830() done.
p48xxDoTest()
Bank 0 overwritten
found 0 bytes of memory
No memory ! No scanner...
p48xxReadWriteTest()
Found a 96003 ASIC at Reg 0x13
ModelSet4830()
modelInitPageSettings()
A4 set
ModelSet4830() done.
p48xxDoTest()
Bank 0 overwritten
found 0 bytes of memory
No memory ! No scanner...
p48xxReadWriteTest()
Found a 96003 ASIC at Reg 0x13
ModelSet4830()
modelInitPageSettings()
A4 set
ModelSet4830() done.
p48xxDoTest()
Bank 0 overwritten
found 0 bytes of memory
No memory ! No scanner...
p48xxReadWriteTest()
Found a 96003 ASIC at Reg 0x13
ModelSet4830()
modelInitPageSettings()
A4 set
ModelSet4830() done.
p48xxDoTest()
Bank 0 overwritten
found 0 bytes of memory
No memory ! No scanner...
p48xxReadWriteTest()
Found a 96003 ASIC at Reg 0x13
ModelSet4830()
modelInitPageSettings()
A4 set
ModelSet4830() done.
p48xxDoTest()
Bank 0 overwritten
found 0 bytes of memory
No memory ! No scanner...
detectScannerConnection() returns -9020.
************* ASIC9800x *************
IOInitialize()
ASIC = 0x20
Unknown ASIC-ID
*** DETECTION DONE, result: -9020 ***
ptdrvClose()
MiscRestorePort()
- no need to restore portmode !
Releasing parport
ptdrvShutdown()
cleanup device 0
Port unregistered
ProcFsShutdown()
pt_drv: proc del 'info' root='pt_drv'
pt_drv: proc del 'pt_drv' root='/proc'
pt_drv : no device(s) detected, (-9020)
---------------------------------------------
