plustek: insmod pt_drv failed
Subject:
Re: insmod pt_drv failed
From:
Heiko Schmidt-Evers ####@####.####
Date:
23 May 2002 23:59:45 -0000
Message-Id: <200205240358.55428.Heiko.Schmidt-Evers@gmx.de>
On Thursday, 23. May 2002 20:49 Jaeger, Gerhard wrote:
[...]
> Change the settings of your parport! The ASIC is detected
> correctly, but in EPP mode, the driver can't access the memory!
>
> As first test, try and set the parport to SPP (in the BIOS), then
> you might try EPP but NOT ECP...
In my BIOS-Setup i have four options for "Onboard Parallel Mode" The last time
I had EEP/SPP and "Parallel Port EEP Type": EPP 1.9. Shall I try EPP 1.7?
There are two other options with ECP. I did not try them.
This time i tried SPP like you said.
This is the new mesg output with SPP mode:
*********************************************
pt_drv: init_module()
pt_drv : driver version 0.40-18
ProcFsInitialize()
ptdrvInit(0)
Init settings done
ScanData = 0xc5e68000
Using fast I/O
Requested port at 0x378
parport0: PC-style at 0x378, irq 7 [PCSPP]
Requested port (0x378) found
Port mode reported: (0x0041)
Port for device 0 registered
ptdrvOpen(port=0x378)
Try to claim the parport
parport-modi: SPP
Using SPP-mode
Trying faster mode...
Starting Scanner-Autodetection
************ DETECTP48xx ************
ModelSet4800()
modelInitPageSettings()
A4 set
ModelSet4800() done.
P48xxInitAsic()
DacInitialize()
ImageInitialize()
IOFuncInitialize()
IOInitialize()
MotorInitialize()
Dataport = 0x0378
Ctrlport = 0x037a
Test 0x55
Test 0xAA
Compare data=0x7f and status=0x7f, port=0x378
detectScannerConnection() returns -9021.
************* ASIC9800x *************
IOInitialize()
ASIC = 0x77
Unknown ASIC-ID
*** DETECTION DONE, result: -9020 ***
ptdrvClose()
MiscRestorePort()
- no need to restore portmode !
Releasing parport
ptdrvShutdown()
cleanup device 0
Port unregistered
ProcFsShutdown()
pt_drv: proc del 'info' root='pt_drv'
pt_drv: proc del 'pt_drv' root='/proc'
pt_drv : no device(s) detected, (-9020)
---------------------------------------------
