plustek: Re: plustek 96000 problem
Subject:
Re: plustek 96000 problem
From:
####@####.#### (Jesper K. Pedersen)
Date:
22 Aug 2000 14:45:56 -0000
Message-Id: <lw4s4dqro4.fsf@erasure.blackie.dk>
I've just tried moving the scanner to another computer with the following
description, and the scanner doesn't work with this computer either. Is
there anybody else with a plustek 96000 scanner with the same problem? Can
anybody help me, please.
Cheers Jesper.
The other computer:
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Pentium III (Coppermine)
stepping : 3
cpu MHz : 701.607
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
sep_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr xmm
bogomips : 1402.47
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Pentium III (Coppermine)
stepping : 3
cpu MHz : 701.607
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
sep_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr xmm
bogomips : 1399.19
Linux version 2.2.16 ####@####.#### (gcc version 2.95.3 19991030 (prerelease))
#3 SMP Sat Aug 19 17:50:14 CEST 2000
####@####.#### (Jesper K. Pedersen) writes:
| Here comes my original letter sent to ####@####.####
|
| --------------------------------------------------------->
| I've tried hard to make my plustek 96000 driver work, but it fails. I hope
| you have the time to help me.
|
| I've installed the program as described in the instruction, I even tried
| installing version 1.0.2 of sane, and version 0.35 of your driver. The
| result is the same.
|
| Initially when I write scanimage -L it worked a bit and told me that it
| found my scanner - GREAT!
|
| OK. I then tried to scan a page using scanimage.
| Initially it said a strange sound for one second (like bzzzz), and then it started
| scanning. One third of a page down it stopped and said the very awful sound
| again. So now It is stuck there and whenever I ask it to scan or even just
| use the -L option, then bzzzzzz.
|
| I've tried rebooting and even installing windows to try the scanner from
| windows. That worked fine, but back in Linux it started over again: A short
| bzzzz then scan one third of a page and bzzzzzzzz the rest.
|
| Hope you can help me.
|
| Let me know if I can help you with any debugging.
| <-----------------------------------------------------------
|
| ####@####.#### (G. Jaeger) writes:
|
| | Hi Jesper,
| |
| | first of all, please use version 0.36 (I know, standard advise).
| I tried that initially. When that didn't work I searched the net and found
| some letters where people had minor problems with older versions, so I
| though, let me try an older version, this might be a bug introduced in the
| new version.
|
| | Then tell me something about your system
| | (What Kernel, what CPU etc)
| processor : 0
| vendor_id : AuthenticAMD
| cpu family : 5
| model : 6
| model name : AMD-K6tm w/ multimedia extensions
| stepping : 2
| cpu MHz : 200.461138
| fdiv_bug : no
| hlt_bug : no
| sep_bug : no
| f00f_bug : no
| coma_bug : no
| fpu : yes
| fpu_exception : yes
| cpuid level : 1
| wp : yes
| flags : fpu vme de pse tsc msr mce cx8 sep mmx
| bogomips : 399.77
|
| Linux version 2.2.14-15mdk ####@####.#### (gcc version 2.95.2
| 19991024 (release)) #1 Tue Jan 4 22:24:20 CET 2000
|
| | Then activate the debug messages (in the makefile, then
| | line with #DEBUG=y! Uncomment this line)
| | Reinstall and retest
| | Send the output of dmesg to me and to our mailing list.
| OK. Here is step by step what I did.
| - tar xvzf ~/tmp/sane-1.0.3.tar.gz
| - cd sane-1.0.3
| - tar xvzf ~/tmp/plustek-sane-0_36_18.tar.gz
| - emacs backend/plustek_driver/Makefile
| - added DEBUG=y
| - ./configure --prefix=/opt/sane-1.0.3-plustek-0.36.18
| - make
| - su
| - make install
| - exit
| - cd backend/plustek_driver
| - make
| - su
| - make install
| - make load
| /sbin/modprobe pt_drv || exit 1
| /lib/modules/2.2.14-15mdk/misc/pt_drv.o: unresolved symbol parport_unregister_device
| /lib/modules/2.2.14-15mdk/misc/pt_drv.o: unresolved symbol parport_enumerate
| /lib/modules/2.2.14-15mdk/misc/pt_drv.o: unresolved symbol parport_register_device
| /lib/modules/2.2.14-15mdk/misc/pt_drv.o: unresolved symbol parport_claim
| /lib/modules/2.2.14-15mdk/misc/pt_drv.o: unresolved symbol parport_release
| make: *** [load] Error 1
| - modprobe parport
| - make load
| -------------------------std out--------------------
| /sbin/modprobe pt_drv || exit 1
| rm -f /dev/pt_drv
| mknod /dev/pt_drv c `cat /proc/devices | sed -ne "s/\([0-9]*\) pt_drv/\1/p"` 0chgrp "root" /dev/pt_drv
| chmod "664" /dev/pt_drv
|
| ------------------ /var/log/message ---------------------------
| *********************************************
| pt_drv: init_module()
| ptdrvInit(0)
| Init settings done
| ScanData = 0xc2d70000
| Requested port at 0x378
| Requested port (0x378) found
| Port mode reported: (0x0079)
| Port registered
| ptdrvOpen(port=0x378)
| Try to claim the parport
| Using SPP-mode
| Attempting to set EPP from ECP mode.
| Port is set to (ECP) EPP mode.
| Starting Scanner-Autodetection
| ************ DETECTP48xx ************
| ModelSet4800()
| modelInitPageSettings()
| A4 set
| ModelSet4800() done.
| P48xxInitAsic()
| DacInitialize()
| ImageInitialize()
| IOInitialize()
| MotorInitialize()
| Test 0x55
| Test 0xAA
| Compare data=0x7e and status=0xe, port=0x378
| p48xxReadWriteTest()
| Found a 96003 ASIC at Reg 0x13
| ModelSet4830()
| modelInitPageSettings()
| A4 set
| ModelSet4830() done.
| p48xxDoTest()
| found 131072 bytes of memory
| tmpByte[0x18] = 0x02
| tmpByte = 0x02, cntr = 128, AsicId = 0x10
| ModelSet12000() done.
| ModelSet9360()
| modelInitPageSettings()
| A4 set
| ModelSet9630() done.
| ModelSet12000() done.
| It seems we have a 12000P/96000P
| DacInitialize()
| ImageInitialize()
| IOInitialize()
| MotorInitialize()
| detectScannerConnection() returns 0.
| p48xxSetupScannerVariables()
| Status-Register = 0xA6
| Scanner has Full/Half Stepping drive
| CCD is SONY Type
| *** setupBuffers ***
| Driverbuf(170780 bytes) needed !
| pColorRunTab = 0xc493152c
| Switching lamp 0 on.
| ptdrvClose()
| *** cleanup buffers ***
| MiscRestorePort()
| Releasing parport
| pt_drv: driver version = 0.36, device 0 ready
| pt_drv: 12000P/96000P found on port 0x0378
| pt_drv: Lamp-Timer set to 180 seconds.
| pt_drv: WarmUp period set to 30 seconds.
| pt_drv: Lamp untouched on driver unload.
| pt_drv: init done - OK
| ---------------------------------------------
|
|
|
|
| - /opt/sane-1.0.3-plustek-0.36.18/bin/scanimage -L
|
| ---------------------- std out ------------------------------
| device `plustek:/dev/pt_drv' is a Plustek 12000P/96000P Driver-Version
| 0.36 flatbed scanner
|
| ---------------------- /var/log/messages ----------------------------------
| pt_drv_open()
| ioctl(_PTDRV_OPEN_DEVICE)
| Lamp-Timer stopped !
| Init settings done
| ptdrvOpen(port=0x378)
| Try to claim the parport
| Using SPP-mode
| Attempting to set EPP from ECP mode.
| Port is set to (ECP) EPP mode.
| Starting Scanner-detection for P48xx
| ************ DETECTP48xx ************
| ModelSet4800()
| modelInitPageSettings()
| A4 set
| ModelSet4800() done.
| P48xxInitAsic()
| DacInitialize()
| ImageInitialize()
| IOInitialize()
| MotorInitialize()
| Test 0x55
| Test 0xAA
| Compare data=0x7e and status=0xe, port=0x378
| p48xxReadWriteTest()
| Found a 96003 ASIC at Reg 0x13
| ModelSet4830()
| modelInitPageSettings()
| A4 set
| ModelSet4830() done.
| p48xxDoTest()
| found 131072 bytes of memory
| tmpByte[0x18] = 0x02
| tmpByte = 0x02, cntr = 128, AsicId = 0x10
| ModelSet12000() done.
| ModelSet9360()
| modelInitPageSettings()
| A4 set
| ModelSet9630() done.
| ModelSet12000() done.
| It seems we have a 12000P/96000P
| DacInitialize()
| ImageInitialize()
| IOInitialize()
| MotorInitialize()
| detectScannerConnection() returns 0.
| p48xxSetupScannerVariables()
| Status-Register = 0xA6
| Scanner has Full/Half Stepping drive
| CCD is SONY Type
| *** setupBuffers ***
| Driverbuf(170780 bytes) needed !
| pColorRunTab = 0xc493152c
| ioctl(_PTDRV_GET_CAPABILITES)
| ioctl(_PTDRV_GET_LENSINFO)
| ioctl(_PTDRV_STOP_SCAN)
| Waiting for Sensor to be back in position
|
| ------------------- scanner --------------------------------
| Makes an awful noise, the light is on, the scanning device is stuck one
| third down and do not move!
|
| Hope this tells you something.
|
|
| Kind Regards and thank you very much for any help you can give.
| Jesper.
|
| --
| Do you need help with configuring those awful dot files?
| Please consult
|
| The Dotfile Generator
|
| at http://www.imada.sdu.dk/~blackie/dotfile/
| help is avilable for bash, elm, fvwm, ipfwadm, procmail, rtin and tcsh.
