plustek: unresolved symbols
Subject:
Re: Unresolved symbols
From:
Karsten Giesow ####@####.####
Date:
18 Jun 2002 21:21:43 -0000
Message-Id: <200206181122.54758.K.Giesow@gmx.net>
Hi Gerhard,
your mail-adresse is not working.
If I'm using reply the mail came back.
Am Montag, 17. Juni 2002 08:35 schrieb Jaeger, Gerhard:
> Hi,
>
> the problem is the old tar-ball, in the versions 0.41 and 0.42
> this problem has been already solved!
> I'm wondering about the version 2.4.28 ;-)))
Yes You are right. It must be 2.4.18-4GB
Sorry.
> I'm not sure which SANE-version they're using, I think 1.0.7,
> so simply put this RPM onto you're machine and use plustek-module41
> That should do the trick...
You are right again, it is version 1.0.7-59 .
But I couldn't bring my scanner to work.
During the installation I couldn't see something what is looking wrong.
Please take a look at the messages from ls mod
---------
nathan:/home/karsten # lsmod
Module Size Used by Tainted: P
pt_drv 111264 0 (unused)
snd-pcm-oss 45152 1 (autoclean)
snd-mixer-oss 11136 1 (autoclean)
NVdriver 946752 10 (autoclean)
parport_pc 25448 2 (autoclean)
lp 5824 0 (autoclean)
parport 21856 2 (autoclean) [pt_drv parport_pc lp]
snd-ens1371 12036 2
snd-pcm 58528 0 [snd-pcm-oss snd-ens1371]
snd-timer 11456 0 [snd-pcm]
snd-rawmidi 13536 0 [snd-ens1371]
snd-seq-device 4336 0 [snd-rawmidi]
snd-ac97-codec 24196 0 [snd-ens1371]
snd 31720 0 [snd-pcm-oss snd-mixer-oss snd-ens1371
snd-pcm snd-timer snd-rawmidi snd-seq-device snd-ac97-codec]
soundcore 3268 6 [snd]
ipv6 123424 -1 (autoclean)
joydev 5728 0 (unused)
evdev 3904 0 (unused)
input 3072 0 [joydev evdev]
st 25844 0 (autoclean) (unused)
sg 23620 0 (autoclean)
usb-uhci 20996 0 (unused)
usbcore 55136 1 [usb-uhci]
ne2k-pci 4800 1
8390 5856 0 [ne2k-pci]
hisax 500452 4
isdn 119104 6 [hisax]
slhc 4432 1 [isdn]
isa-pnp 27816 0 [hisax]
ide-scsi 7648 0
reiserfs 158816 1
---------
I have made also the test like in the test-file
---------
nathan:/home/karsten # cat /proc/pt_drv/device0/info
Model : 600P/6000P
Portaddress : 0x378
Portmode : BiDi (PS/2) (fast I/O, autodetect)
Buttons : 0
Warmuptime : 30s
Lamp timeout: 180s
mov-switch : 0
I/O-delay : 0
CCD-Type : NEC/TOSHIBA Type
TPA : no
nathan:/home/karsten # cat /proc/parport/0/hardware
cat: /proc/parport/0/hardware: Datei oder Verzeichnis nicht gefunden
nathan:/home/karsten #
---------
When I made "scanimage -L" I got no answer from my system
---------
nathan:/home/karsten # scanimage -L
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
nathan:/home/karsten #
---------
This are the lines from /var/log/warn
----------
Jun 18 11:00:46 nathan kernel: pt_drv0: Lamp-Timer set to 180 seconds.
Jun 18 11:00:46 nathan kernel: pt_drv0: WarmUp period set to 30 seconds.
Jun 18 11:00:46 nathan kernel: pt_drv0: Lamp untouched on driver unload
----------
After a reboot, when I made "scanimage -L" as root, The lamp in the scanner
was on, but now it is not more doing.
Please can you tell me where I must search for and perhaps what's my mistake.
Till next time
Karsten
--
Karsten Giesow
Adolf-Donders-Allee 32
46419 Isselburg-Anholt
Tel.: 0172/1655696
Fax: 02874/902680
