plustek: unresolved symbols
Subject:
Re: Unresolved symbols
From:
Karsten Giesow ####@####.####
Date:
21 Jun 2002 21:39:52 -0000
Message-Id: <200206212325.16431.K.Giesow@gmx.net>
Hi Gerhard,
Am Freitag, 21. Juni 2002 10:56 schrieben Sie:
> Hi Karsten,
>
> my mail address is still working, see signature. I changed
> the reply address to reduce spam mails....
Yes, now I have seen.
>
> Well the problem is only, that scanimage doesn't find the scanner
> pt_drv is fine, it's loaded (see lsmod) and your scanner is here,
> see cat /proc/pt_drv/device0/info...
yes, my scanner is there, but first I must make an
insmod pt_drv
If I don't do so, the result is following.
>
> To see the real problem, I need the debug output of SANE:
> open a shell
> do a
> export SANE_DEBUG_PLUSTEK=12
-------------------------------
karsten@nathan:~> su
Password:
nathan:/home/karsten #
nathan:/home/karsten # export SANE_DEBUG_PLUSTEK=12
nathan:/home/karsten # scanimage -L
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
nathan:/home/karsten # export SANE_DEBUG_PLUSTEK=12 scanimage -L
bash: export: `-L': not a valid identifier
nathan:/home/karsten # lsmod
Module Size Used by Tainted: P
snd-pcm-oss 45152 1 (autoclean)
snd-mixer-oss 11136 1 (autoclean)
NVdriver 946752 10 (autoclean)
parport_pc 25448 1 (autoclean)
lp 5824 0 (autoclean)
parport 21856 1 (autoclean) [parport_pc lp]
snd-ens1371 12036 2
~~~~~~~~~~~~~~~~~~~
-------------------------------
> then call scanimage -L and send me the output (remember not only
> reply to this mail ;-)))
after
insmod pt_drv
it is just the same
----------------------------------
nathan:/home/karsten # insmod pt_drv
Using /lib/modules/2.4.18-4GB/misc/pt_drv.o
nathan:/home/karsten # export SANE_DEBUG_PLUSTEK=12
nathan:/home/karsten # scanimage -L
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
nathan:/home/karsten #
----------------------------------
>
> P.S.: Sorry for the late reponse...
Is okay. I know that you have a lot of to do, and that you are not only
working for the mailing list.
Perhaps, in my second mail from wednesday, I tried to uninstalled all and
unload all after this I made all new and the I found a mistake.
When I made make install, I got a warning, perhaps there is the mistake.
I will copy the step with the warning.
------------------------------------------------
####@####.#### su
Password:
nathan:/home/karsten/Plustek-Treiber0.41/plustek_driver # make install
mkdir -p /lib/modules/2.4.18-4GB/misc
install -c -m "644" pt_drv.o /lib/modules/2.4.18-4GB/misc
/sbin/depmod -a
depmod: *** Unresolved symbols in /lib/modules/misc/pt_drv.o
nathan:/home/karsten/Plustek-Treiber0.41/plustek_driver #
------------------------------------------------
I think there it is what the driver is missing, but I don't know what this
means: Unresolved symbols in /lib/....
Have I made something wrong by the installation?
mfg
Karsten
--
Karsten Giesow
Adolf-Donders-Allee 32
46419 Isselburg-Anholt
Tel.: 0172/1655696
Fax: 02874/902680
