plustek: Plustek U12 that isn't a U12 ?
Subject:
Re: Plustek U12 that isn't a U12 ?
From:
"Jaeger, Gerhard" ####@####.####
Date:
5 Jul 2002 09:22:58 -0000
Message-Id: <200207050919.LAA30429@kah.ulm.sysgo.de>
On Donnerstag, 4. Juli 2002 19:13, Victoria Welch wrote:
> Hi All and thanks in advance!
>
> I seem to have a Plustek U12 that is not a plustek U12 :-(.
>
> Not sure what is going on here, I've been trying to get it to work with
> no luck.
>
> In case it helps:
>
> From /proc/bus/usb/devices
>
> P: Vendor=07b3 ProdID=0001 Rev= 0.00
> S: Product=USB Scanner
> C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 48mA
> I: If#= 0 Alt= 0 #EPs= 2 Cls=10(unk. ) Sub=01 Prot=00 Driver=(none)
> E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
> T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 2 Spd=1.5 MxCh= 0
> D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
>
[SNIPSNAP]
>
> If not then I hope the info above will be of some help.
>
> Thanks & take care, Vikki.
Vikki,
I'm afraid, that this "early" U12 is not supported by the Plustek
backend. This scanner is a device, that uses the old 98003 ASIC
for parallelport devices and a USB-PARALLEL bridge.
Sorry
Gerhard
-------------------------
|gerhard AT gjaeger DOT de|
-------------------------