plustek: unresolved symbols
Subject:
Re: Unresolved symbols
From:
"Jaeger, Gerhard" ####@####.####
Date:
24 Jul 2002 18:04:24 -0000
Message-Id: <17XQHX-1n3YdkC@fmrl10.sul.t-online.com>
On Tuesday, 23. July 2002 08:43, you wrote:
[SNIP]
> But a mysterious problem has arisen. When I type 'scanimage -L' no
> information appears on the attached scanner. But the kernel messages are
> the following:
>
> SMSC Super-IO detection, now testing Ports 2F0, 370 ...
> parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP]
> parport0: cpp_daisy: aa5500ff(38)
> parport0: assign_addrs: aa5500ff(38)
> parport0: cpp_daisy: aa5500ff(38)
> parport0: assign_addrs: aa5500ff(38)
> pt_drv0: P12 found on port 0x0378
> pt_drv0: Lamp-Timer set to 180 seconds.
> pt_drv0: WarmUp period set to 15 seconds.
> pt_drv0: Lamp untouched on driver unload.
>
> I suppose it means the scanner is detected. Anyway it is not available.
> SANE has failed to use it. Anyway, when I run 'scanimage -L' first time
> after booting sometimes the lamp of the scanner is turned off or off and
> on again. But only the first time. If run 'scanimage -L' again nothing
> happens. What could be wrong? Do I set wrong parameters in
> modules.conf? Do you have any idea?
Hi,
the scanner is detected - okay! So what about the device-node
/dev/pt_drv
does it exist?
Is the Plustek backend enabled in sane.d/dll.conf?
Is the parport device enabled in sane.d/plustek.conf?
You might enable the sane debug stuff and send us the output:
export SANE_DEBUG_DLL=255
export SANE_DEBUG_PLUSTEK=12
scanimage -L
Hope this helps
Gerhard
