Subject:
problems with sane
From:
####@####.####
Date:
25 Aug 2002 13:17:44 -0000
Message-Id: <E17ixGX-0006vE-00@f27.test.onet.pl>
I use Mandrake 8.2
Sane find-scanner recognized my scanner but scan image doesn't work.
please, help me
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 11/900 us ( 1%), #Int= 1, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=d400
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=03f0 ProdID=1204 Rev= 1.00
S: Manufacturer=Hewlett-Packard
S: Product=DeskJet 930C
S: SerialNumber=ES03E170YBJJ
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=01 Driver=usblp
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
I: If#= 0 Alt= 1 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=07b3 ProdID=0010 Rev= 1.00
S: Manufacturer=PLUSTEK INC
S: Product=USB SCANNER
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=ff Driver=usbscanner
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl= 16ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
sanei_debug] Setting debug level of dll to 12.
[dll] sane_init: SANE dll backend version 1.0.6 from sane-backends-1.0.8
[dll] add_backend: adding backend `net'
[dll] add_backend: adding backend `plustek'
[dll] load: searching backend `plustek' in `/usr/local/lib/sane'
[dll] load: trying to load `/usr/local/lib/sane/libsane-plustek.so.1'
[dll] load: dlopen()ing `/usr/local/lib/sane/libsane-plustek.so.1'
[dll] init: initializing backend `plustek'
[sanei_debug] Setting debug level of plustek to 12.
[plustek] sane_init: sane-backends 1.0.8
[plustek] sane_init, ># Plustek-SANE Backend configuration file<
[plustek] sane_init, ># For use with Plustek parallel-port scanners and<
[plustek] sane_init, ># LM9831/2/3 based USB scanners<
[plustek] sane_init, >#<
[plustek] sane_init, ># For parport devices use the parport section<
[plustek] sane_init, >#<
[plustek] sane_init, >[parport]<
[plustek] next device is a PARPORT device
[plustek] sane_init, >device /dev/pt_drv<
[plustek] Decoding device name >/dev/pt_drv<
[plustek] sane_init, ><
[plustek] sane_init, >#<
[plustek] sane_init, ># leave the default values as specified in /etc/modules.conf<
[plustek] sane_init, >#<
[plustek] sane_init, >option warmup -1<
[plustek] Decoding option >warmup<
[plustek] sane_init, >option lOffOnEnd -1<
[plustek] Decoding option >lOffOnEnd<
[plustek] sane_init, >option lampOff -1<
[plustek] Decoding option >lampOff<
[plustek] sane_init, ><
[plustek] sane_init, ><
[plustek] sane_init, >#<
[plustek] sane_init, ># The USB section:<
[plustek] sane_init, ># each device needs at least two lines:<
[plustek] sane_init, ># - [usb] vendor-ID and product-ID<
[plustek] sane_init, ># - device devicename<
[plustek] sane_init, ># i.e. for Plustek (0x07B3) UT12/16/24 (0x0017)<
[plustek] sane_init, ># [usb] 0x07B3 0x0017<
[plustek] sane_init, ># device /dev/usbscanner<
[plustek] sane_init, >#<
[plustek] sane_init, ># additionally you can specify some options<
[plustek] sane_init, ># warmup, lOffOnEnd, lampOff<
[plustek] sane_init, >#<
[plustek] sane_init, ># For autodetection use<
[plustek] sane_init, ># [usb]<
[plustek] sane_init, ># device /dev/usbscanner<
[plustek] sane_init, >#<
[plustek] sane_init, ># NOTE: autodetection is safe, as it uses the info it got<[plustek] sane_init, ># from the USB subsystem. If you're not using the<
[plustek] sane_init, ># autodetection, you MUST have attached that device<[plustek] sane_init, ># at your USB-port, that you have specified...<
[plustek] sane_init, >#<
[plustek] sane_init, ><
[plustek] sane_init, >[usb]<
[plustek] attach (/dev/pt_drv, 0xbfffd1e0, (nil))
[plustek] Device configuration:
[plustek] device name : >/dev/pt_drv<
[plustek] porttype : 0
[plustek] USB-ID : ><
[plustek] warmup : -1s
[plustek] lampOff : -1
[plustek] lampOffOnEnd : -1
[plustek] pos_x : 0
[plustek] pos_y : 0
[plustek] neg_x : 0
[plustek] neg_y : 0
[plustek] tpa_x : 0
[plustek] tpa_y : 0
[plustek] red Gamma : 1.00
[plustek] green Gamma : 1.00
[plustek] blue Gamma : 1.00
[plustek] gray Gamma : 1.00
[plustek] ---------------------
[plustek] drvopen()
[plustek] open: can't open /dev/pt_drv as a device
[plustek] open failed: -1
[plustek] next device is a USB device (autodetection)
[plustek] next device is an USB device
[plustek] sane_init, ><
[plustek] sane_init, >#<
[plustek] sane_init, ># options for the previous USB entry<
[plustek] sane_init, >#<
[plustek] sane_init, ># switch lamp off after xxx secs, 0 disables the feature< [plustek] sane_init, >option lampOff 0<
[plustek] Decoding option >lampOff<
[plustek] sane_init, ><
[plustek] sane_init, ># warmup period in seconds, 0 means no warmup<
[plustek] sane_init, >option warmup 30<
[plustek] Decoding option >warmup<
[plustek] sane_init, ><
[plustek] sane_init, ># 0 means leave lamp-status untouched, not 0 means switch off<
[plustek] sane_init, ># on sane_close<
[plustek] sane_init, >option lOffOnEnd 0<
[plustek] Decoding option >lOffOnEnd<
[plustek] sane_init, ><
[plustek] sane_init, >#<
[plustek] sane_init, ># options to tweak the image start-position<
[plustek] sane_init, ># (WARNING: there's no internal range check!!!)<
[plustek] sane_init, >#<
[plustek] sane_init, ># for the normal scan area<
[plustek] sane_init, >#<
[plustek] sane_init, >option posOffX 0<
[plustek] Decoding option >posOffX<
[plustek] sane_init, >option posOffY 0<
[plustek] Decoding option >posOffY<
[plustek] sane_init, ><
[plustek] sane_init, ># for transparencies<
[plustek] sane_init, >option tpaOffX 0<
[plustek] Decoding option >tpaOffX<
[plustek] sane_init, >option tpaOffY 0<
[plustek] Decoding option >tpaOffY<
[plustek] sane_init, ><
[plustek] sane_init, ># for negatives<
[plustek] sane_init, >option negOffX 0<
[plustek] Decoding option >negOffX<
[plustek] sane_init, >option negOffY 0<
[plustek] Decoding option >negOffY<
[plustek] sane_init, ><
[plustek] sane_init, >#<
[plustek] sane_init, ># for adjusting the default gamma values<
[plustek] sane_init, >#<
[plustek] sane_init, >option redGamma 1.0<
[plustek] Decoding option >redGamma<
[plustek] sane_init, >option greenGamma 1.0<
[plustek] Decoding option >greenGamma<
[plustek] sane_init, >option blueGamma 1.0<
[plustek] Decoding option >blueGamma<
[plustek] sane_init, >option grayGamma 1.0<
[plustek] Decoding option >grayGamma<
[plustek] sane_init, ><
[plustek] sane_init, >#<
[plustek] sane_init, ># to enable TPA (non Plustek devices only)<
[plustek] sane_init, ># 0 means default behaviour as specified in the internal tables<
[plustek] sane_init, ># 1 means enable<
[plustek] sane_init, >#<
[plustek] sane_init, >enableTPA 0<
[plustek] ignoring >enableTPA 0<
[plustek] sane_init, ><
[plustek] sane_init, >#<
[plustek] sane_init, ># and of course the device-name<
[plustek] sane_init, >#<
[plustek] sane_init, >device /dev/usbscanner<
[plustek] Decoding device name >/dev/usbscanner<
[plustek] sane_init, ><
[plustek] sane_init, >#<
[plustek] sane_init, ># to define a new device, start with a new section:<
[plustek] sane_init, ># [usb] or [parport]<
[plustek] sane_init, >#<
[plustek] attach (/dev/usbscanner, 0xbfffd1e0, (nil))
[plustek] Device configuration:
[plustek] device name : >/dev/usbscanner<
[plustek] porttype : 1
[plustek] USB-ID : ><
[plustek] warmup : 30s
[plustek] lampOff : 0
[plustek] lampOffOnEnd : 0
[plustek] pos_x : 0
[plustek] pos_y : 0
[plustek] neg_x : 0
[plustek] neg_y : 0
[plustek] tpa_x : 0
[plustek] tpa_y : 0
[plustek] red Gamma : 1.00
[plustek] green Gamma : 1.00
[plustek] blue Gamma : 1.00
[plustek] gray Gamma : 1.00
[plustek] ---------------------
[plustek] drvopen()
[plustek] usbDev_open(/dev/usbscanner,)
[plustek] open failed: -1
[dll] init: backend `plustek' is version 1.0.0
[plustek] sane_get_devices (0xbffff2b8, 0)
[dll] load: searching backend `net' in `/usr/local/lib/sane'
[dll] load: trying to load `/usr/local/lib/sane/libsane-net.so.1'
[dll] load: dlopen()ing `/usr/local/lib/sane/libsane-net.so.1'
[dll] init: initializing backend `net'
[dll] init: backend `net' is version 1.0.8
scanimage: no SANE devices found
[dll] sane_exit: exiting
[dll] sane_exit: calling backend `plustek's exit function
[plustek] sane_exit
[dll] sane_exit: calling backend `net's exit function
[dll] sane_exit: finished
[Content type application/octet-stream not shown. Download]
