plustek: Problems with Epson 1250


Previous by date: 23 Sep 2002 14:19:06 -0000 Re: Problems with Epson 1250, Gene Heskett
Next by date: 23 Sep 2002 14:19:06 -0000 OpticPro4830P Scanner, FE63LADY.aol.com
Previous in thread: 23 Sep 2002 14:19:06 -0000 Re: Problems with Epson 1250, Gene Heskett
Next in thread: 23 Sep 2002 14:19:06 -0000 Re: Problems with Epson 1250, Gene Heskett

Subject: Re: Problems with Epson 1250
From: Jean-Jacques de Jong ####@####.####
Date: 23 Sep 2002 14:19:06 -0000
Message-Id: <3D8F205E.5040705@st.com>

####@####.#### wrote:

>Couple questions:
>
>1) does your kernel's drivers/usb/scanner.h have the vendor/product 
>defines in it, or are they defined in /etc/modules.conf?  
>Personally I've been doing the former by editing the file before I 
>bult the kernel, but now its incorporated since about 2..4.19.
>Presently running 2.4.20-pre7-ac3...
>
I have the vendor info as options in my modules.conf, since it is an 
Epson using the Plustek driver.

>2) did the rpms change the perms on /dev/usb/scanner, or 
>/dev/usbscanner?  I just took a quick look at my /dev/usb/scanner* 
>stuff, and its all restricted to root, "crw------", so I'd expect 
>to have to modify that to use it as non-root.  Yeah, a quick su 
>gene and its "no devices found".
>
I had the same problems before I upgraded. Anyway, my /dev/usb/scanner0 
file is created on the fly when the scanner is plugged in, and the 
permissions seem to be assigned dynamically: the owner is the user 
logged in under X...

As I said below, everything seems to be set up correctly driver-wise, 
since I can scan perfectly using VueScan (commercial software, but cheap 
and mighty interesting). It's just Sane that seems to react strange with 
this "device already open" message.

JJJ

>
>-----Original Message-----
>From: Jean-Jacques de Jong ####@####.####
>Sent: Tuesday, September 17, 2002 8:11 AM
>To: ####@####.####
>Subject: Problems with Epson 1250
>
>
>I got my Epson 1250 to work on my Mandrake 8.2 just a few times.
>With Sane 1.0.7 (from Mdk 8.2) I got bad colors. After
>upgrading to Sane 1.0.8, I got correct colors.
>
>But most of the time, I can't get the scanner to work with Sane,
>although it works with VueScan. sane-find-scanner finds my
>scanner, but scanimage finds nothing. In my syslog I get the message
>"scanner.c: open_scanner(0): Scanner device is already open".
>
>Does anyone know what is wrong?
>
>Thanks,
>JJJ
>



Previous by date: 23 Sep 2002 14:19:06 -0000 Re: Problems with Epson 1250, Gene Heskett
Next by date: 23 Sep 2002 14:19:06 -0000 OpticPro4830P Scanner, FE63LADY.aol.com
Previous in thread: 23 Sep 2002 14:19:06 -0000 Re: Problems with Epson 1250, Gene Heskett
Next in thread: 23 Sep 2002 14:19:06 -0000 Re: Problems with Epson 1250, Gene Heskett


Powered by ezmlm-browse 0.20.